This hole cover is almost two inches in diameter. It fits below the surface burner knob of some ranges, and has a center hole just big enough for the knob's shaft.
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
This surface element is made for under glass set-ups and supplies the heat to a cooking area on top of the range. It has an outside diameter of approximately 7 inches (1500 watts), and is a genuine OEM part sourced directly from the manufacturer. Before you replace your faulty element, make sure the element is cool, and the power is disconnected from your range.
This Infinite Switch Surface Control Switch is a genuine OEM component designed specifically for a range of Whirlpool appliances. Its main function is to regulate the heat of the stove element on your cooktop. As a specific fit for various models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef, it ensures optimum...Read more performance and a precise fit. Please pay attention to the size and shape of the part during placement as minor variations might exist. Validate your model number correctly before making your purchase. Remember, quality matters ? always choose genuine Whirlpool parts for guaranteed compatibility and durability.
This infinite switch knob is just over two inches in diameter. It is all black in color and is made of plastic. This knob has light gray lettering denoting the off, low, medium low, medium, medium high, and high positions. This knob is just over an inch tall.
This is a Dual Element Infinite Control Switch that serves as a surface element control switch for a dual-sized element, brought to you by the reputable brand, Whirlpool. Expertly crafted, this switch is a genuine OEM part that aligns perfectly with specific models from Whirlpool, ensuring the best performance for your appliance. As every...Read more model has its unique specifications, it is encouraged to counter-check your model specifications with this part before making your purchase. Please be aware that while parts may appear similar, even slight variations in size and shape can have significant impact. This top-quality Dual Element Infinite Control Switch is set to exceed your expectations in enhancing your appliance's functionality. Trust in the reliability of Whirlpool and ensure the perfect fit for your model today.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Outer Heater ring not working on dual burner.
24 of 28 peoplefound this instruction helpful.
Mark from Richardson, TX
Really Easy
30 - 60 mins
Screw drivers
Turned off power to unit. Tilted up Glass top and removed two screws holding rear hinges to range. Then I unplugged wire harness from lower range and placed the Glass top facing down on counter top with towel for cushion. Removed 1 screw holding center of burner to support frame, two alignment screws on perimeter, and two screws hol
... Read moreding support frame to glass top. This allowed me to slide out the old element with all wiring connections intact. Placed the new assembly in same location under support frame, noting numbered positions of two alignment screws from old unit. This is necessary to properly align heater to surface glass. Replaced all screws connecting burner to frame. Then I removed each wire one-by-one from old unit, reconnecting to same location on new unit.
Replaced top in reverse order from removal. Powered on the circuit breaker and verified proper operation of dual unit with large/small selecttor switch. Total time to repair about 30 minutes.
Read less
Was this helpful?
Thank you for voting!
Burner switch failed (full on, even in "lo")
21 of 34 peoplefound this instruction helpful.
Stephen from Seneca, SC
Easy
1- 2 hours
Pliers, Screw drivers
Managed to reach down from the top, unscrew the old part, so I could remove from under the cooktop. Easy to trace the wires, and map them to the (slightly different) replacement. Works like a charm, and new part appears to be of higher quality than the old one.
Was this helpful?
Thank you for voting!
The burner was not heating up
11 of 14 peoplefound this instruction helpful.
Jeffrey from Miami Lakes, FL
Really Easy
Less than 15 mins
Pliers, Screw drivers
I removed only 3 screws that allowed me to lift the glass top on the stove. I removed the burner and I could see where it short circuited. I ordered the new burner element. After it arrived I replaced it by moving the wires from the old element to the new element, and put it back together. I am sure that I saved at least $200 in "lab
... Read moreor".