My Orders
- Home
- AJHS08DCM1
- Instructions
AJHS08DCM1 General Electric Air Conditioner - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
vibration, one fan blade broken off
15 of 17 people
found this instruction helpful.
-
HERBERT from WOODCLIFF LAKE, NJ
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Removed A/C unit from wall, removed 8 screws that held fan motor in place, removed 8 screws that held fan shroud in place, removed fan blade nut and pulled fan blade unit from motor shaft. Reversed steps to install.
Was this helpful?
Thank you for voting!
Power Cord Replacement
11 of 13 people
found this instruction helpful.
-
David from San Jose, CA
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
The Power Cord has a breaker on the plug. The breaker did not 'trip' during a power surge and fried the board in the plug. it melted. I ordered the replacement plug. Took apart the unit. Unplugged the power cord ends from the main unit. The ground wire (green) is screwed in. The other wires (white and black) are attached via push-on termi
... Read more
nals. These are harder to get off and on since there are many and are in a tight space. May want to use some long needle nose pliers to assist. The new cable was attaced. There are two plastic clamps that help screw the cord to the unit. Only porblem was the new cord plugs in upside down so you will need to turn the outlet plug around. Turn off power, unscrew outlet and turn upside down. return power to outlet and plug in to complete.
Read less
Was this helpful?
Thank you for voting!
blade broken
9 of 11 people
found this instruction helpful.
-
Nelson from Jersey City, NJ
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
order a new fan blade and replaced it
Was this helpful?
Thank you for voting!