AH600-1654P Tecumseh Engine - Parts

This genuine OEM sourced replacement fuel tank is a high-quality item that is specially designed for use with Husqvarna handheld lawn and garden equipment. Its purpose is to hold the fuel that is needed for the engine. Over time the tank may get damaged or lost eventually requiring a replacement. It includes the fuel tank, the cap, the fu...Read moreel lines and the clamps to secure them. Make sure to drain the gas tank before starting the repair.

The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers and a screwdriver. If broken due to wear/fatigue/damage, there may be a fuel leak and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

This is replacement oil for your 2-cycle engine. Oil is important for your 2-cycle engine, as it helps to lubricate the engine parts during operation. This container of oil is 236mL or 8 fluid ounces. It is sold individually.

This is a genuine replacement part that has been sourced from the original manufacturer to be used with snow thrower engines from Husqvarna and Toro. The metal screw is used to fasten the fuel tank to the tank mounting bracket. This item is available as an individual replacement part, please note a hex socket wrench may be needed to install this item.

This paper air cleaner element, also known as an air filter, is sourced from the original manufacturer for use in outdoor power equipment. It has an outer diameter of 4.25 inches and a height of 3 inches. The air filter is responsible for removing dirt and debris from the air before it enters the engine to keep the engine free from contam...Read moreinants. Over time, it is normal for the paper on the filter to tear or become clogged, thereby restricting airflow, increasing fuel consumption, and damaging the engine. Regularly inspecting and replacing the air filter is critical to maintaining the performance of your engine. To begin this repair, locate the air filter housing near the engine or carburetor and remove the cover. Carefully remove and discard the old filter, making note of its position. Clean the air filter housing and insert a new, clean filter in the correct position. Place the cover back onto the housing and ensure that it is tightly fitted to prevent air leaks.

This is an OEM part sourced directly from the manufacturer. The air vane is designed for use in Toro snowthrowers. This part is made of high-quality plastic, and is used to engage the governor link. You may require a screwdriver when replacing this part. This item is sold individually.

This replacement muffler is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. The purpose of a muffler is to reduce the noise from the engine's exhaust. Over time it may wear out or get clogged eventually requiring a replacement. It is a high-quality metal body component which is sold as an...Read more individual item. Please note the muller includes two bolts to secure it and one gasket.

This spark plug cover is supplied directly from the original equipment manufacturer. The rubber and metal component is often used in snowthrower engines, and is sold individually. The spark plug cover is fitted over the spark plug wire connection, providing protection. A screwdriver and pliers may be required for the removal and replacement.