AH23 Shindaiwa Hedge Trimmer - Parts

This genuine Primer Cover, or Primer Pump Cover, is a silver, individually sold, steel part with dimensions of around 1x1 inch. This part is installed using a screwdriver, and is rated as Easy to install by our customers. This part secures the plastic primer bulb to the air purge body assembly, and must be replaced if damaged or bent.

This replacement bolt is used on Shindaiwa hedge trimmers. It is designed to secure the trimmer blade. The square area under the head is made to fit into a square hole of the of the blade. This opening restrains the bolt and keeps it from turning when the blade nut is tightened. This bolt is sold individually.

59" long and is 1/4 of an inch diameter.

This is an authentic OEM sourced replacement part. This special fuel pipe assembly is used to deliver gasoline from the tank to the carburetor. When the primer bulb is pressed, fuel will be forced through this line into the carburetor. It is made out of flexible plastic and it is sold individually. Please note, clips, joints and the fuel filter are all sold separately.

This is an authentic OEM part from the Shindaiwa manufacturer. The metal washer is compatible with many hedge trimmer devices. The washer helps the bolts to secure the trimmer blades. This item is sold individually. A wrench and a hex key are often needed for the repair.

This OEM Hex Socket Bolt is a black, 5x12mm, individually sold, metal part. A Hex Socket and Torque Wrench can be used to secure the part in place by torqueing to the manufacturer specifications. The part must be replaced when damaged (likely due to fatigue), for example if it is rounded off, has stripped threads, or is missing altogether.

This is an original Shindaiwa replacement part manufactured for use with outdoor power equipment. The joint is used to connect fuel lines and is commonly used to connect the return fuel line to the fuel tank grommet. This joint is sold individually, please seem model diagram for associative parts.

This is a genuine Shindaiwa replacement part manufactured for outdoor power equipment. This kit is OEM, not an aftermarket imitation. The kit includes the diaphram, and gaskets between the air purge body, and carburetor body. It is recommended to replace the gaskets when reassembling the carburetor after a repair, the kit is sold individually.

This is a genuine manufacturer sourced replacement washer that is designed for use with Shindaiwa and Echo handheld lawn and garden equipment. It helps to distribute the pressure evenly between two connected parts, for proper application please make sure to check appropriate diagrams of your unit. This part is made from durable metal and it is sold individually.

This spark plug cap is a genuine OEM sourced replacement part that is commonly utilized on Shindaiwa lawn and garden equipment. It is used to connect the spark plug to the ignition wire. Please note this durable rubber part is sold individually.

This is an original replacement part manufactured for use with outdoor power equipment. The special screw is used with several types of equipment and the screw may have multiple applications. This fuel pump cover screw is used to secure the primer cover to the air purge body and fuel pump body. The fuel pump screw is available as an individual replacement part, please see model diagram for part location and usage.

This genuine manufacturer-sourced component which is supplied by the original equipment manufacturer for use with Shindaiwa handheld trimmers. It is an identical replacement for a missing or a faulty 22" blade that was included with a new unit, unfortunately, please make sure to check the owners manual of your model for the correct locati...Read moreon and application of this component. Keep in mind this high-quality blade is made of durable metal and is sold individually.