AGV18 Air Conditioner - Overview

This fan assembly or also known as a condenser fan blade is used in air conditioners. The blade fits onto the motor shaft and distributes air over the condenser to cool the refrigerant before it goes into the evaporator. This part blows air parallel to the motor shaft which the blade rotates on to successfully circulate the air. It is mad...Read moree from white plastic. *Please note: This part is sold individually. This part comes with a slinger ring. Refer to the manual provided by the manufacturer for installation instructions and further guidance.

The installation kit contains the hardware you need to install the room air conditioner in a window. The kit also includes the accordion filler panels, installation brackets and seal.

This part attaches to the curtain to help hold it in place.

If your air conditioner is not blowing cold air, the problem may be in the capacitor. If the capacitor fails, the compressor will not start and the fan will only blow warm air. The compressor and capacitor are located inside the cabinet and to gain access you will need to remove the cover. If the capacitor does not show any visible signs ...Read moreof damage you may require a qualified technician to test it. Make sure that the replacement capacitor has the same specifications as the original. NOTE: Because capacitors carry a charge even when the unit is disconnected from the power, use extra caution when performing this repair.

This is a rotary switch for your air conditioner. It will allow you to select the different control options, such as the fan and cooling modes. This process happens by the switch sending voltage to the unit. If your switch is broken the air conditioner will not start. This model is roughly 2 inches long by 2 inches wide, and about 2.5 inches thick. This piece is 20 amps and 125/250 volts.