AGR6 Range - Parts

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-o...Read moreut bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.

Upgrade your cooktop with this easy-to-install electric coil cartridge, perfect for replacing worn-out burners and restoring consistent heat. The sleek stainless steel housing holds two coil burners—one large (2100W) and one small (1250W)—giving you the flexibility to cook everything from quick breakfasts to hearty dinners. Compatible wit...Read moreh a variety of ranges, this module is a simple way to refresh your kitchen setup. Sold as a single unit.

7-18 x 3/4-Inch - sold individually.

This bake oven spark igniter is a genuine replacement part designed for gas ranges equipped with a direct spark ignition (DSI) system. It generates the spark needed to ignite the oven burner gas and works in coordination with the safety valve, which opens only when the igniter reaches the proper temperature. Compatible with select Whirlpo...Read moreol, KitchenAid, and Maytag models, this OEM component helps resolve issues such as the oven not heating, producing minimal heat, or the igniter glowing without lighting the burner. Constructed from high-quality ceramic and metal materials, it offers durability and reliable performance. For safe installation, disconnect power and gas supply before replacing the part.

This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. The sensor detects the temperature in the oven cavity. If the following symptoms occur, replacing the temperature sensor could be the solution: Little or no heat when baking, oven not heating evenly, oven will...Read more not start, and/or oven is overheating. Often, if the sensor is defective, the oven temperature will fluctuate and be inaccurate by more than 50 degrees. The tool needed for this replacement is a #2 square head screwdriver or a #2 Philips screwdriver. Remember to unplug the range before installing the part.

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.

This stove cartridge assembly, also known as a cooktop module, is a manufacturer-approved replacement part for your stove. It is black in color and comes complete with burner elements. Make sure to shut off power to the unit before replacing this part.

This OEM replacement rear drawer glide supports the storage drawer on your range, and allows the drawer to open and close with ease. If your storage drawer will not open or close, or catches and sticks when you are trying to move it, there could be an issue with the glides. Check the glides and glide channels for any physical damage, and ...Read moremake sure they are properly fastened to the range walls. To complete this quick and easy repair, you will need a Phillips screw driver. Because the drawer has four glides and each are sold separately, make sure to order the correct amount you require.

This oven rack is a piece for your range. The oven rack is sold individually and is silver in color. The function of this part is to provide a balanced and flat surface for your cookware to sit inside your oven. The measurements of this piece are 24 inches wide and 16 inches deep. When replacing your old oven rack with your new piece, no ...Read moretools are required. Before making this installation, make sure your range is turned off and your oven has cooled down inside.

This black radiant element cartridge is a genuine replacement module designed for use with select cooktops and ranges. Featuring an Ultra Quick-Start radiant heating element beneath a sleek glass-ceramic surface, it delivers efficient and responsive heat for everyday cooking. The cartridge includes two burners, a main top, housing, and te...Read morerminal connections, and is designed to plug directly into compatible cooktop units. Measuring approximately 24 inches in length, 5.5 inches in width, and 14.5 inches in height, it fits a variety of models from Jenn-Air, KitchenAid, Maytag, Kenmore, and other Whirlpool-affiliated brands. Installation requires basic hand tools and novice repair experience. Always disconnect power before beginning any repairs. Sold individually.

This is a door hinge active with spring, for your range. The hinge controls the opening and closing of the oven door. If your oven door seems to be sticking, you may want to consider replacing this part. We recommend replacing both hinges at the same time. This model is roughly 9.5 inches long, f4 inches wide, and almost 1inch thick.

This screw is sold individually.