My Orders
AGR573 Amana Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Wouldn't Heat
1 person
found this instruction helpful.
-
JANIE from DETROIT, MI
- Really Easy
- 1- 2 hours
-
Pliers, Screw drivers
I first removed the screws inside the oven,let the tube that the flames come out of hang down,removed the screws from the igniter. Then I took the cover off the back of the stove and unplugged the old igniter and plugged in the new one. I put all screws back and put every thing back in place and the oven has been heating up every since
... Read more
. Thank you parts select. My husband is a otr trucker and won't be home until the 20th of this month. One less item on his "honey do list".
Read less
Was this helpful?
Thank you for voting!
Oven slow to light
1 person
found this instruction helpful.
-
Dianna from Granite Falls, WA
- Really Easy
- Less than 15 mins
-
Socket set
Simple... unscrew the 2 screws and unplug the electrical connection to uninstall and just the opposite to install.
Was this helpful?
Thank you for voting!
ignitor went out
1 person
found this instruction helpful.
-
Horacio from La Habra, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
one screw holds the cover to the connector. one screw for the burner tube to the oven frame. two screws hold the ignitor bracket/assembly to the burner tube. that's it. take four screws off and disconnect. connect and put four screws back on.
Was this helpful?
Thank you for voting!
My original back leg broke because the floor is uneven. Had to pull it out several times.
1 person
found this instruction helpful.
-
Phyllis from BROWNVILLE, NY
- Really Easy
- Less than 15 mins
-
Wrench (Adjustable)
Put the back of stove on blocks of wood to get high enough to screw the new leg in.
Was this helpful?
Thank you for voting!
Oven Glass Door Front Shattered
2 of 4 people
found this instruction helpful.
-
Jamin from Inverness, FL
- Easy
- Less than 15 mins
-
Screw drivers
A friend helped me to fix it. First I removed the door from the oven itself. Next, we unscrewed the four screws from the glass holder at the bottom of the door and removed it. Next, we straightened out the glass holder, as it was slightly bent up from the front glass shattering. Next, we slid the glass into the door. Finally, we rei
... Read more
nstalled the door to the oven. Voila! It was like brand new again.
Read less
Was this helpful?
Thank you for voting!
Neede new burner caps for cooktop
2 of 4 people
found this instruction helpful.
-
Anne from Roseland, NJ
- Really Easy
- Less than 15 mins
Nothing mechanical was required! But the service was phenomenal. These are just a drop in part. I was thrilled that you had them, received them in one day without overnight charges, And the cost was very reasonable.
Other Parts Used:
Was this helpful?
Thank you for voting!
Oven heated very slowly
1 person
found this instruction helpful.
-
Thomas from Muskego, WI
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Removed the drawer from under the stove then unscrewed the access panel in the back (two phillips head screws). Rather than take it off altogether I just swung it to one side.
The ignitor electrical connector required two hands to disconnect and it was a bit of a reach but came apart easily enough once I got hold of it.
... Read more r />Removed the racks and bottom from the oven. the bottom is held in by two pins in the back that you just slide toward the front then lift it out. I did not bother to remove the oven door, but some people might.
Then removed the two hex head screws holding the ignitor on and pulled the connector out of the hole leading to the bottom.
Installation is the reverse of removal The electrical connector was reluctant to back down the hole, but went with a little wiggling and pulling from underneath. Once you get it back down there the connector is keyed, so you can't get it wrong.
Piece of cake, really.
Total repair time: about 30 minutes, including the mandatory halfway beer break.
The ignitor electrical connector required two hands to disconnect and it was a bit of a reach but came apart easily enough once I got hold of it.
... Read more r />Removed the racks and bottom from the oven. the bottom is held in by two pins in the back that you just slide toward the front then lift it out. I did not bother to remove the oven door, but some people might.
Then removed the two hex head screws holding the ignitor on and pulled the connector out of the hole leading to the bottom.
Installation is the reverse of removal The electrical connector was reluctant to back down the hole, but went with a little wiggling and pulling from underneath. Once you get it back down there the connector is keyed, so you can't get it wrong.
Piece of cake, really.
Total repair time: about 30 minutes, including the mandatory halfway beer break.
Read less
Was this helpful?
Thank you for voting!
The oven did not heat, but the top burners worked fine.
1 person
found this instruction helpful.
-
Marvin from DECATUR, GA
- Really Easy
- 15 - 30 mins
-
Screw drivers
1. Slowly pull the stove from wall. 2. Unplug 120 volts plug from outlet. 3.Turned off the gas outlet. 4. Open the stove door, remove the racks, then unscrew (2) screws that hold the short oven sensor in place. 5. Slowly pull sensor out of it's housing. Remove the clip that holds the sensor. Install new sensor using the clip. Push sensor
... Read more
back through the hole opening. Screw the (2) screws into the mount to secure the sensor. 6. Plug the 120 volt plug into the wall outlet. Turn on the gas outlet. Test stove by turning on oven. It works like a new stove. Wife is happy, and Thanks Giving Dinner is on! Reverse your steps to secure your stove. A total of 25 minutes after cleaning the dust under stove. Thanks for everything. By the way, Thanks Giving Dinner was delicious.
Read less
Was this helpful?
Thank you for voting!
Broiler wouldn't turn on(ignite)
1 person
found this instruction helpful.
-
James from FLORISSANT, MO
- Very Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Ordered the broiler igniter that matched my model from part select and installed. Easy and part works as it should. Only took a few days to get here and saved me $40 by not purchasing at a local parts store as well. Will use part select if there are any future needs.
Was this helpful?
Thank you for voting!
Bake - No Heat, Broil - Heat
1 person
found this instruction helpful.
-
Jon from ELKO NEW MRKT, MN
- Very Easy
- 15 - 30 mins
-
Screw drivers
There are two elements to look at, one on top (broil) and one on the bottom (bake). Same element but may have different connectors. Double check before ordering.
Was this helpful?
Thank you for voting!
Oven wouldn't heat
1 of 2 people
found this instruction helpful.
-
Stacey from Woverine Lake, MI
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
I removed the floor of the oven (one screw) and the heat dispersal shield (one wing nut). Then I detached the old igniter using a socket set. I had to remove the bottom drawer to unplug the ignitor and plug in the new one. Then I reassembled. Total piece of cake and I have no experience whatsoever.
Was this helpful?
Thank you for voting!
overn not heating
1 of 2 people
found this instruction helpful.
-
Mary Anne from Niles, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Thinking we had a difficult/expensive repair, when the oven stopped working this summer - we just took advantage of the weather and grilled out. Apple season and the desire for fresh baked apple pie motivated us to action. We ordered the part - found simply on the site - it arrived promptly. A screw driver took off the oven bottom, we
... Read more
replaced the igniter and within 15 minutes our oven was working again. Why did we wait so long?
Read less
Was this helpful?
Thank you for voting!
Smell of gas and would not always light or took forever to preheat
1 of 2 people
found this instruction helpful.
-
William from Forked River, NJ
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Remove the oven door by opening halfway and lifting door away from stove. Removed racks and bottom pan from oven area exposing the gas bar and vertical mount igniter. Next remove bottom storage door. With phillips screwdriver remove 2 screws securing rear cover plate in back of storage area, accessing the igniter connection, and unplug th
... Read more
e plug. Next back in oven, remove 2 5/16 sheet metal screws securing igniter with a nut driver and remove igniter by getly pulling disconnected end thru to oven. Now reverse process, install new vertical mount igniter and push connection down thru to storage area, then reconnect wire connection and put cover plate back on.
At this piont I turned oven on and checked igniter, it glowed red right away and the oven lit right up. Put storage door, oven door, bottom oven panel, and racks back in and done. Took 15 minutes tops, and anyone can do this, super easy. My oven would sometimes take half hour to preheat to 350,if it even lit, now 5 minutes, and it lights every time. Save the cost of a repair man folks, this one can be done by any weekend warrior.
I would just like to note....if you are uncomfortable with disconnecting wire plugs and plugging them back in, just unplug the oven from the wall as well before changing out the part, just to be safe.
At this piont I turned oven on and checked igniter, it glowed red right away and the oven lit right up. Put storage door, oven door, bottom oven panel, and racks back in and done. Took 15 minutes tops, and anyone can do this, super easy. My oven would sometimes take half hour to preheat to 350,if it even lit, now 5 minutes, and it lights every time. Save the cost of a repair man folks, this one can be done by any weekend warrior.
I would just like to note....if you are uncomfortable with disconnecting wire plugs and plugging them back in, just unplug the oven from the wall as well before changing out the part, just to be safe.
Read less
Was this helpful?
Thank you for voting!
Needed to replace over door gasket
2 of 5 people
found this instruction helpful.
-
Genie from Conshohocken, PA
- Really Easy
- Less than 15 mins
-
Pliers
Very Simple, I recommend pulling the old gasket in sections, and popping the new gasket metal holders in the holes as you go. You can't mess it up. For the ends, I tucked them in using a pair of needle nose pliers, but any small slender tool, such as a thin screwdriver, will work.
Was this helpful?
Thank you for voting!
old igniter wouldn't get hot enough to allow gas flow
1 of 2 people
found this instruction helpful.
-
Donald from Mokena, IL
- Easy
- Less than 15 mins
-
Screw drivers, Socket set
Nothing to it - remove oven bottom, and burner cover, unscrew the 2 scews holding the igniter
(one of mine sheared off now only one is holding the new igniter in - it still works) unplug wire at the connector then reverse and the oven is as good as new. The best part is that I received my part in only 2 days.
(one of mine sheared off now only one is holding the new igniter in - it still works) unplug wire at the connector then reverse and the oven is as good as new. The best part is that I received my part in only 2 days.
Was this helpful?
Thank you for voting!