My Orders
AGR56 Amana Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven not reaching temperature
2 of 2 people
found this instruction helpful.
-
Marsha from Clermont, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Simple-pulled range away from wall, unplug from socket. Removed back panel unscrewed thermoses and replace. Put back panel back on plug in, tested temperature setting before sliding range back on place
Was this helpful?
Thank you for voting!
Exterior glass of oven door broke spontaneously
2 of 2 people
found this instruction helpful.
-
Nancy from SAN FRANCISCO, CA
- Really Easy
- 15 - 30 mins
We cheated; a local appliance repair company was called & the tech guy repaired it in 10 - 20 minutes. Couldn't be happier.
Was this helpful?
Thank you for voting!
Paint peeling from strip
3 of 5 people
found this instruction helpful.
-
Myron from Punta Gorda, FL
- Easy
- 15 - 30 mins
-
Nutdriver
removed 3 screws holding the strip and replaced with new strip
Was this helpful?
Thank you for voting!
You
2 of 2 people
found this instruction helpful.
-
Ron from CARIBOU, ME
- Really Easy
- 30 - 60 mins
Pleaae prepopulate the manufacturer and part i purchased. I fix a lot of appliances so cannot expend the effort to decipher this.
Be well.
Be well.
Was this helpful?
Thank you for voting!
Very hard to close the door range, especially one way and it sticks to close.
2 of 2 people
found this instruction helpful.
-
Joanne from LAUDERHILL, FL
- Very Easy
- 30 - 60 mins
-
Screw drivers
First, view videos to know what is an active door range problem.
Second, when you know the problem, see videos on you tube and be sure you will replace the right part
Third, I go to Part Select, see reference video for your problem if you need and buy the part on line, good price, very quick delivery.
Second, when you know the problem, see videos on you tube and be sure you will replace the right part
Third, I go to Part Select, see reference video for your problem if you need and buy the part on line, good price, very quick delivery.
Was this helpful?
Thank you for voting!
Stove would not light due to faulty electronic ignighter
2 of 2 people
found this instruction helpful.
-
Victor from SAINT PETERS, MO
- Really Easy
- 30 - 60 mins
Very easy repair, simply remove old ignighter and install new one. Take pictures if you need help remembering where everything goes.
Was this helpful?
Thank you for voting!
Door hinge fell apart
2 of 2 people
found this instruction helpful.
-
myron from west salem, WI
- Really Easy
- 30 - 60 mins
-
Screw drivers
Watched a video first. The repair was easy.
Was this helpful?
Thank you for voting!
Didn’t work
2 of 3 people
found this instruction helpful.
-
James E. from WAYNE, MI
- Really Easy
- 30 - 60 mins
-
Screw drivers
Took out old one but electric hook up fell in the hole had to fish it out also dropped a screw in the hole could’ve find it used a different one
Was this helpful?
Thank you for voting!
Replace Door Hinges
2 of 3 people
found this instruction helpful.
-
Glenda from ROCK HILL, SC
- Very Easy
- 30 - 60 mins
-
Screw drivers
So glad I found the parts I needed! I followed the GREAT video instructions on this site and when I opened the oven door up discovered there had only been ONE spring inside this whole time! I replaced both springs & hinges easily, cleaned up the glass while I had the door off, and everything went right back into place!
Was this helpful?
Thank you for voting!
temp level uneven
2 of 3 people
found this instruction helpful.
-
Paul from HARMONY, MN
- Very Easy
- 15 - 30 mins
after watching the video, installed the temp sensor. Super easy
Was this helpful?
Thank you for voting!
the oven temperature was not working right. I installed a new oven sensor. Works get now
3 of 6 people
found this instruction helpful.
-
Rosalind from APOLLO, PA
- Very Easy
- 15 - 30 mins
-
Screw drivers
Watch the video...
Was this helpful?
Thank you for voting!
Control knob broken
2 of 3 people
found this instruction helpful.
-
Ann from BROOKLYN, NY
- Very Easy
- Less than 15 mins
Slipped the old one off and slipped the new one on. Could not have been simplier.
Was this helpful?
Thank you for voting!
Gas oven interment lighting. Pan was cracked and out of shape.
2 of 3 people
found this instruction helpful.
-
Teddy from PRAIRIEVILLE, LA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Loosen top two rear screws from the top pan. Remove top pan
Remove 2 front screws from bottom pan. Remove bottom pan. Reverse order.
Replace both pans.
Remove 2 front screws from bottom pan. Remove bottom pan. Reverse order.
Replace both pans.
Was this helpful?
Thank you for voting!
last oven bottom was ruined by melted and burnt plastic
2 of 3 people
found this instruction helpful.
-
Dennis from Missouri Valley, IA
- Really Easy
- 15 - 30 mins
-
Screw drivers
took out old oven bottom by removing 2 screws, placed the new oven bottom in place put the screws back in and was done.
Was this helpful?
Thank you for voting!
Active spring broken
2 of 3 people
found this instruction helpful.
-
Angelo from NAPLES, FL
- A Bit Difficult
- 1- 2 hours
-
Screw drivers
Removed the oven door listened to a video/You tube and the rest was easy.When you remove the door panels make sure all the parts are assembled correctly.
Was this helpful?
Thank you for voting!