AGR0 Air Conditioner - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
on-off switch defective - stuck in on position
3 of 3 people
found this instruction helpful.
-
Richard from Riverwoods, IL
- Easy
- Less than 15 mins
-
Screw drivers
I removed the filter and then the two screws that held the outside cover of the air conditioner. I slid the cover off and pried the defective switch out of the panel. I exchanged the wires to the new switch and pushed the new switch into the panel with my fingers. I then replaced the cover and the air conditioner works fine.
Other Parts Used:
Was this helpful?
Thank you for voting!
old fan broken
-
Christine from Cane Ridge, TN
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
took a/c apart, every screw and nut. Had never fixed one before but decided I would make the effort. ordered part and fan went back on really easy, it was the exact part I needed and ordering it was real simple. The diagram of parts made it easy to locate the correct item, ordered and in less than an hour after receiving part a/c was work
... Read more
ing perfect.Thanks for you service,
Read less
Was this helpful?
Thank you for voting!