Pull range away from back wall. Remove panel behind control knobs by removing the screws that hold it on. Find hot burner light that holds lens. Remove broken part of lens. Insert new lens into hole on front of control panel and into hot burner light receptacle. Replace back panel. Slide range back into place.
Was this helpful?
Thank you for voting!
Missing screw to range door handle
1 of 2 peoplefound this instruction helpful.
Stanley from TRENTON, NJ
Very Easy
Less than 15 mins
The part that was ordered based on the shamanic wasn't the part that was needed for the repair. It was to short. I took the other screw for the other side and that screw was an inch longer than the screw that was ordered thru your company. I then went too a jar that I placed extra screws, nuts and bolts which l keep in my garage . I found
... Read more a same length screw but a different head and it works perfectly fine. When I ordered the part from your company most of the parts did not have a photo of the part on file, or a description like how long the part is. I still ordered it because it should fit the make and model number that was posted on the shamanic that was showed to me on line.
Read less
Was this helpful?
Thank you for voting!
burner cap wasn't working proper.
1 of 2 peoplefound this instruction helpful.
GLENN from ST CLR SHORES, MI
Really Easy
Less than 15 mins
took burner off installed new one thank you for fast shipping
Was this helpful?
Thank you for voting!
old burners were rusty and broken
1 of 2 peoplefound this instruction helpful.
Henry from Houston, TX
Really Easy
Less than 15 mins
Pliers
I just lifted the old part and dropped the new one in. Everything fits perfectly. The new flame is a beautiful blue color.
Was this helpful?
Thank you for voting!
Burners were plugged
1 of 2 peoplefound this instruction helpful.
Heather from Wauconda, WA
Really Easy
Less than 15 mins
We bought our replacement burners from Part Select.com at half the price of another major appliance store. They came fast & fit perfect. All around, we are very happy.
Was this helpful?
Thank you for voting!
burner did not light
1 of 2 peoplefound this instruction helpful.
Doan from Flushing, NY
Really Easy
Less than 15 mins
just lift the cover and put it on.less than 1 minute.
Was this helpful?
Thank you for voting!
Cracks in the bruner due to corrosion
1 of 2 peoplefound this instruction helpful.
Carlos from Miami, FL
Really Easy
Less than 15 mins
I bought a new Doble Burner assembly and replaced the old ones. Piece of cake.
Was this helpful?
Thank you for voting!
The pipe that carry the gas to the ignition part was damaged, therefore the burner was not lightening up.
2 of 5 peoplefound this instruction helpful.
Hyojin from Monmouth Junction, NJ
Really Easy
Less than 15 mins
Just have to remove the old kit and replace it with the new one. No tool required.
Was this helpful?
Thank you for voting!
broken part
1 of 3 peoplefound this instruction helpful.
David from Warwick, RI
Really Easy
Less than 15 mins
The key here was that I found the correcd part for an older kenmore oven and it was easily installed
Was this helpful?
Thank you for voting!
one of the stove top burners had burned all the way through
1 of 3 peoplefound this instruction helpful.
Brenda from Franklin, NC
Really Easy
Less than 15 mins
matched part needed on web site; took off burner; ordered part; received it on the third day and easily replaced it. Wonderful, easy, and very short delivery time! Thanks.
Was this helpful?
Thank you for voting!
old burner assembly could no longer be cleaned
1 of 3 peoplefound this instruction helpful.
clare from north brunswick, NJ
Really Easy
Less than 15 mins
pop up range top. pull off old burner. put on new one. close top. check for rocking. install leveling washer. check again. 2nd burner didn't require leveling so it was quicker.
My Orders
