AFF2 Amana Refrigerator - Parts

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold. This valve is used on side by side or bottom mount refrigerators.

This door gasket is for refrigerators. The door gasket is on the inner door panel and creates a seal around the door to prevent warm air from entering the refrigerator.

The ice bucket in your freezer catches and holds the ice when it is released by the icemaker. If your ice bucket is cracked or damaged, you may need to replace it to prevent a potential leak. This part is made of white plastic and is sold individually. This ice bucket is approximately 15 inches long by 12 inches wide. Many of our customer...Read mores have rated this repair as very easy. To complete this repair, simply remove the old ice bucket and replace it with the new one. Be sure to remove any broken pieces of the old ice bucket before replacing it.

This defrost thermostat is a temperature sensing mechanism used in freezers and refrigerators. The thermostat senses the rise in evaporator temperature during a defrost cycle and turns the defrost heater off once frost is melted from the coils. If the freezer is not defrosting, or the freezer section is too warm, it is best to replace the...Read more thermostat to fix the problem. The tools needed for this project are: 1/4 inch nut driver, flat blade screwdriver, needle nose pliers, wire strippers, and pair of wire nuts. Remember to unplug your appliance from the power source for safety and refer to the manual provided by the manufacturer for installation instructions.

This is an evaporator fan motor, it is 115 volts and 60 hertz and it is for your refrigerator/freezer. You will need to replace this part if your appliance is too warm or getting noisy. This evaporator fan motor is located in the back of the freezer. This part circulates air over the refrigerator coils. These coils will convert the heat i...Read morento cool air, which is then circulated throughout your appliance. To replace this part you will need a 1/4-inch nut driver and a pair of needle nose pliers.

Sold individually.

This wheel is sold individually. It is located on the bottom of the refrigerator.

This crisper drawer cover frame is a genuine OEM replacement part designed to support the crisper drawer and hold the shelf that covers it in your refrigerator. Compatible with select models from Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef, this frame plays a crucial role in organizing and protecting the content...Read mores of your refrigerator. It is essential for maintaining the proper function and alignment of the crisper drawer. Please note that the shelf insert, which provides a flat surface over the frame, is sold separately. To ensure a proper fit, verify compatibility with your appliance model before ordering. When installing the frame, unplug the refrigerator for safety and wear work gloves to protect your hands. Subtle variations in size or shape may exist, so visually inspect the part and compare it with your existing component for accuracy.

This genuine refrigerator door shelf bin provides convenient storage for bottles, jars, condiments, and other frequently used items while helping maximize available space inside the refrigerator door. Featuring a clear plastic design with white trim, it allows contents to remain easily visible and accessible while helping keep the refrige...Read morerator organized. Replacing a cracked, damaged, or missing door bin can restore storage capacity and improve everyday convenience. Installation is quick and tool-free—simply align the bin with the molded door supports and slide it securely into place. The bin measures approximately 18-1/2 inches wide by 8 inches high.

Sold individually.

This part supplies water to refrigerator components that require water, such as the ice maker and water dispenser. If you notice a leak coming from your refrigerator, the plastic tubing that feeds your water and ice dispenser might need to be replaced. This part is made of clear plastic and is 1/4 inch thick, and 8 1/2 feet long. Make sur...Read moree to disconnect power to the refrigerator and shut off the water supply prior to installing this part. Safely store any perishable food items that could deteriorate while the power to the refrigerator is disconnected. Work gloves are recommended to protect your hands during this installation.

Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.