Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
temp level uneven
2 of 3 peoplefound this instruction helpful.
Paul from HARMONY, MN
Very Easy
15 - 30 mins
after watching the video, installed the temp sensor. Super easy
Was this helpful?
Thank you for voting!
the fastener became loose and dropped into the stove
2 of 3 peoplefound this instruction helpful.
George E from OCALA, FL
Really Easy
30 - 60 mins
This is a cook stove that is used 5 months a year. We have not fixed it yet because we are now in Florida the stove is in New York. We ordered that part just before we left NY for FL so the repair will be done in June of 2021. George Clark
Was this helpful?
Thank you for voting!
Bake element died
1 personfound this instruction helpful.
Jill from LYNNWOOD, WA
Easy
30 - 60 mins
Screw drivers
Followed instructions on urine that you provided. Instructions were great. Only problem had was the screw was hard to get loose on one due to oven usage from previous people but I got it after a bit and then fairly simple from there. Unplugged and plugged new element in. Works although seems to run a bit hotter than before.
Was this helpful?
Thank you for voting!
element burned out shortly after purchase of range, one was purchased locally and did not fit properly, causing element to burn out
1 personfound this instruction helpful.
Sue from INDIANOLA, MS
Really Easy
30 - 60 mins
replaced element with new one , worked perfectly-
Was this helpful?
Thank you for voting!
bake element out
1 personfound this instruction helpful.
Joyce from BALLWIN, MO
Really Easy
30 - 60 mins
use needle nose pliers to disconnect the element from the power supply. After disconnecting it was easy to repair.
Was this helpful?
Thank you for voting!
Drip Pans were stained and burned on.
1 personfound this instruction helpful.
Sandra Collignon from SANTA CLAUS, IN
Really Easy
30 - 60 mins
Replaced drip pan. Notch did not want to match the burner notch. Was a close fit bit with a little pressure made it work.
Was this helpful?
Thank you for voting!
range would not heat right
1 personfound this instruction helpful.
bobby from HERSCHER, IL
Really Easy
30 - 60 mins
Screw drivers
very easy watched the howto you gave
Was this helpful?
Thank you for voting!
cooktop on the rt side would just keep getting hot
1 personfound this instruction helpful.
Michael from GRAND PRAIRIE, TX
Easy
1- 2 hours
Pliers, Screw drivers
Removed the ifinite controlswitch and replaced it but i dont believe it is wired correctly. now it wont get hot until it is set on four or so. think i the way it is wired.
Remove 2 screws inside oven holding element . Remove screws holding back panel. Plug wires (2) into new element.Install back panel . Done.
Was this helpful?
Thank you for voting!
Oven would not heat up.
1 personfound this instruction helpful.
Johnie from PARKERSBURG, WV
Really Easy
15 - 30 mins
Screw drivers
Unplugged the range. Opened the oven door and took out the shelves. Took the right screw out, but had trouble getting the left one out do to the age of the range. Unhooked the two wires and took the element out. Put the new one in and hooked up the two wires. Attached the two screws and checked to see that the element laid flat and t
... Read morehen tighten screws. Closed the door and plugged the range back in and turned the oven on and it worked perfect.
Read less
Was this helpful?
Thank you for voting!
Oven Elementwas burnt into
1 personfound this instruction helpful.
Fred from APACHE JCT, AZ
Very Easy
Less than 15 mins
Screw drivers
Watched the video and did as shown
Was this helpful?
Thank you for voting!
screw came off
1 personfound this instruction helpful.
Sandeep from EDINA, MN
Very Easy
Less than 15 mins
Screw drivers
very expensive to buy the part but just tighten the screw intot eh predefined place.
Was this helpful?
Thank you for voting!
Stove burner burned out
1 personfound this instruction helpful.
Ben from MONTICELLO, UT
Very Easy
Less than 15 mins
Very helpful customer service Lady. Helped me select the corect burner replacement. And helped me get it ordered. Repair went very well. I recomend Parts Select if you need parts for.
My Orders
![Infinite Control Switch, 6" – Part Number: WP3149404](/11740785-1-S-Whirlpool-WP3149404-Infinite-Control-Switch-6-amp-quot.jpg "Infinite Control Switch, 6" – Part Number: WP3149404")
