AEQ0 General Electric Air Conditioner - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
ALL FUNCTIONS ON TOUCH CONTROL PAD WORKED EXCEPT TEMP UP & DOWN
22 of 45 people
found this instruction helpful.
-
Lori from COLUMBUS, OH
- Very Easy
- Less than 15 mins
After calling other parts supply companies with not much help, I found a helpful representative at Parts Select. My unit is very old & not many parts are available, so I asked the rep if she thought just buying a remote control would solve the issue since it was obvious that the whole panel was not broken or unusable. She was not sure b
... Read more
ut said she would allow me to return it if it didn't. She sent the remote control out that day, I had it in 2 days. Not only did it totally solve the problem, it saved me a lot of money. Though these companies are not allowed to give technical advice, she was very helpful, friendly & efficient.
Read less
Was this helpful?
Thank you for voting!
Erratic cycling of the compressor.
6 of 11 people
found this instruction helpful.
-
Frank from Prince Frederick, MD
- Really Easy
- 15 - 30 mins
-
Screw drivers
Received the thermost from you in 2 days. (fast and reasonable shipping)
Removed 2 control knobs and front cover.
Removed 2 screws holding controls mounting plate. (About 3 X 6 inches in size)
Removed 2 screws holding thermostat in place.
Installed new trhermostat.
Checked the RAC and all ... Read more was OK.
As a matter of fact, I had to wait for the wife to finish cleaning the front of the RAC.
I am 75years young, retired, repaired appliances for a a short period when I was young before becoming a Factory sales rep. for RCA corp.
I appreciate your fast service and accurately sending me the actual part that I ordered.
Thanks again,
Frank
Removed 2 control knobs and front cover.
Removed 2 screws holding controls mounting plate. (About 3 X 6 inches in size)
Removed 2 screws holding thermostat in place.
Installed new trhermostat.
Checked the RAC and all ... Read more was OK.
As a matter of fact, I had to wait for the wife to finish cleaning the front of the RAC.
I am 75years young, retired, repaired appliances for a a short period when I was young before becoming a Factory sales rep. for RCA corp.
I appreciate your fast service and accurately sending me the actual part that I ordered.
Thanks again,
Frank
Read less
Was this helpful?
Thank you for voting!
The exterior cooling fan blades broke
2 of 2 people
found this instruction helpful.
-
TODD from WESTDALE, NY
- A Bit Difficult
- 1- 2 hours
-
Screw drivers, Wrench set
I dissasembled the unit and replaced the fan
Was this helpful?
Thank you for voting!
no on/off knob
1 person
found this instruction helpful.
-
Susan J from Oneonta, NY
- Really Easy
- Less than 15 mins
even I can replace a control knob....
Was this helpful?
Thank you for voting!
Display board was not working
1 person
found this instruction helpful.
-
EMORY from INTERLACHEN, FL
- Really Easy
- 30 - 60 mins
-
Screw drivers
Slide ac out of its cage and open panel and change display panel and plug in 2 wires
Was this helpful?
Thank you for voting!