ADW1000KB General Electric Dishwasher - Parts

This slide is mounted to each side of the upper cabinet wall. The dishrack wheels roll inside this track, which guides the upper rack.

This door latch kit is used for dishwashers.

This drain hose is an OEM, manufacturer-approved replacement part for your dishwasher. The drain hose filters out the wastewater from the dishwasher. If there is a hole in it, water will leak out of your dishwasher. Shut off the water and power to the unit before beginning this repair. Accessing the drain hose involves unscrewing the dish...Read morewasher and pulling it out. Remove the clamp holding the hose in place to its connection under the sink, using a 5/16ths socket. Disconnect the fill line. Use a 1/4 inch nut driver to loosen the clamp at the other end of the drain hose. Keep a towel handy for any water still inside. Keep the clamps for use on your new drain hose. Reinstall all hoses and lines in reverse order.

This is the drain valve solenoid armature link for your dishwasher. This approximately 0.8-inch piece of metal is used to activate the drain valve for your dishwasher and ensure it opens and closes securely during the draining process. If your dishwasher is having draining issues, and your drain pump and filter are not damaged or clogged,...Read more this armature is likely broken or worn out, and the cause of your dishwasher issues. Replacing this armature will require needle-nose pliers. This is an OEM part, and it is sold individually.

This part attaches to the inner door panel.

This leveling leg is located under the dishwasher cabinet. It is sold individually.

This screw is sold individually. Size 10-16 x 5/8

This part is located at the bottom of the dishwasher and is not designed to heat the water that enters it. Rather, it's designed to maintain the heat of the water that enters the dishwasher.

10-12 x 1/2 inch - Sold individually.