My Orders
ADEE Speed Queen Dryer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Not much heat
0 of 1 people
found this instruction helpful.
-
Richard from Rochester, NY
- Really Easy
- Less than 15 mins
-
Nutdriver
Loosened the screws, took out the old one. It shorted out to back. Inserted the new one attached wires, Installed screws and it worked
Was this helpful?
Thank you for voting!
unit stop heating
0 of 1 people
found this instruction helpful.
-
Douglas from Saginaw, TX
- Really Easy
- 15 - 30 mins
-
Wrench set
once I found where the heat element was, it took me a few mintues to remove the bad one and replace it with the new one that came before the due date. very good instruction in kit. Be sure and leave the old one hooked up until the new unit comes in so you can do a easy exchange of the wiring.
Was this helpful?
Thank you for voting!
Dryer Would Not Heat
0 of 1 people
found this instruction helpful.
-
WILLIAM from ROTONDA WEST, FL
- Really Easy
- 30 - 60 mins
-
Socket set
Removed 2 screws on the bottom of front panel of dryer & pulled it off. Next I got down & looked to the back & bottom inside of the dryer. I spyed the heating element,I pulled off the two wires from the thermostats[ orange & black. I removed two screws from the heating element plate & dropped it down & removed it from the dryer. Reverse
... Read more
procedure to reinstall. Will see if we can get another 10 years service out of it.
Read less
Was this helpful?
Thank you for voting!
dryer not heating up
0 of 2 people
found this instruction helpful.
-
april from lexinton, KY
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
removed old element, relaced with new element , thermostat dryer works better than it has in along time
Was this helpful?
Thank you for voting!