My Orders
AD25TJ1 Whirlpool Dehumidifier - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
the dehumidifier was not shutting off when water level was full
5 of 9 people
found this instruction helpful.
-
Steven from Owings Mills, MD
- Really Easy
- Less than 15 mins
replaced a piece of the plastic at the top of the bucket that seems to be the water gauge. this seems to be fixed. we are very happy
Was this helpful?
Thank you for voting!
float was missing
2 of 5 people
found this instruction helpful.
-
barbra from STERLING HTS, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
pried off the plastic fastener with flat blade screw driver set new float in place then pressed plastic fastener back in place
Was this helpful?
Thank you for voting!
Push on connectors and switch housing were different
0 of 1 people
found this instruction helpful.
-
Lester from Brazil, IN
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers
The switch housing was not exactly the same for easy snap in. I removed the actual switch and installed it into the old housing. Then I found that the male pins were larger than the old ones. I chose to clip off the female connectores, strip the wires, and solder the wires to the pins on the switch. It was easier for me than attempting to
... Read more
change the push on connectors. For me, the actual switch was what I wanted and I fixed it my way. It was easy to do however some folks may want to change the push on connectors. Works great and saved me hundreds of dollars. Thanks.
Read less
Was this helpful?
Thank you for voting!