ACQ254XA0 Whirlpool Air Conditioner - Parts

Sold individually.

This part is located on the drum roller support shaft in your dryer appliance. The exterior of the washer is 1 inch in diameter with a hole in the middle and is made of metal. They are installed alongside the drum support rollers and idler pulleys. If you notice that your dryer is making an unusual sound it could be due to the washer beco...Read moreming loose on the drum support. They help prevent the rollers and pulleys from bumping up against the brackets they are installed on. If you are replacing the rollers, we suggest you replace the washers at the same time.

This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to ...Read morewear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.

This air conditioner control knob is gray in color, and measures approximately 1 inch in diameter. This replacement part allows you to properly control all the air conditioner settings. If your knob has broken or gone missing it will need to be replaced. This repair requires no tools to complete. You simply remove the old knob by pulling ...Read moreit off and press the new knob into place by lining it up with the shaft. This genuine OEM replacement knob is sold individually.

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

This motor clip is an original manufacturer replacement clip used to secure the motor in your home appliances. It holds the motor firmly to its housing to prevent shaking and potential damage while the appliance is in use. Over time the clip can fail due to exposure to high temperatures, vibration, and humidity resulting in an unstable mo...Read moretor and decreased performance. Remove and discard the faulty clip and place the new one in its position. Align it appropriately with the motor and mounting bracket before securing it in place. Be sure to check your equipment specifications as your appliance may require two clips to complete the repair, and this clip is sold individually.

This screw is sold individually. Size: 8-32 x 1/4 inch.

This part is used for room air conditioners. The air filter in your at-home air conditioner keeps dirt, dust, and other airborne particles from getting into your home. Over time, these particles will build up and your air filter will need to be replaced. This is an OEM part sourced directly from the manufacturer. In order to complete this...Read more repair, simply remove the old air filter and replace it with the new one. Many of our customers find this repair to be easy, and describe it as taking less than 10 minutes. This product is sold individually.

Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application reasons. This silicone paste creates a waterproof seal between components. This product is a 2 oz. tube. Unplug your appliance if you will be working on any inter...Read morenal workings and applying this sealant. Wear gloves to protect your hand from accidently applying sealant to your skin. The surface must be clean, dry, and free from oil and grease. Coat one surface and let it dry for at least one minute and then bond.

Sold individually.

This thermostat is for residential air conditioners and is responsible for regulating temperature. The thermostat comes with the clip to attach it to your AC and a visual guide to help with the repair. If your thermostat will not cool properly, or the compressor will not switch on or off, you could have a faulty thermostat. Before you rep...Read morelace your thermostat, remove it from the unit and clear any dust or debris that has built up, because a buildup of dust can interfere with the reading. If the issue continues, you should replace the part. Make sure the power is disconnected to your air conditioning unit before you begin the repair.