ACQ21 Whirlpool Air Conditioner - Parts

Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application reasons. This silicone paste creates a waterproof seal between components. This product is a 2 oz. tube. Unplug your appliance if you will be working on any inter...Read morenal workings and applying this sealant. Wear gloves to protect your hand from accidently applying sealant to your skin. The surface must be clean, dry, and free from oil and grease. Coat one surface and let it dry for at least one minute and then bond.

Sold individually.

This is a remote control, and it is used with your air conditioner. The purpose of the remote control is to allow the user the ability to control the functions of the air conditioner at a distance. This model is beige in color, it is 6 inches long, almost 2 inches wide, and 1.5 inches thick. This remote has the ability to turn your applia...Read morence on and off, raise and lower the temperature, adjust the fan speeds, as well as pick your own cooling mode.

Sold individually.

Sold individually.

This thermostat is for residential air conditioners and is responsible for regulating temperature. The thermostat comes with the clip to attach it to your AC and a visual guide to help with the repair. If your thermostat will not cool properly, or the compressor will not switch on or off, you could have a faulty thermostat. Before you rep...Read morelace your thermostat, remove it from the unit and clear any dust or debris that has built up, because a buildup of dust can interfere with the reading. If the issue continues, you should replace the part. Make sure the power is disconnected to your air conditioning unit before you begin the repair.

A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it shou...Read moreld be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.