ACQ10 Whirlpool Air Conditioner - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lost my remote
9 of 11 people
found this instruction helpful.
-
Dana from Nuevo, CA
- Really Easy
- Less than 15 mins
I really didnt repair anything, but
I wanted to share with you,my experience with parts select. My order was processed lightning fast, the shipping was lightning fast, the remote was the correct one I ordered,and the whole experience was 100% perfect. Thank you so much.
I wanted to share with you,my experience with parts select. My order was processed lightning fast, the shipping was lightning fast, the remote was the correct one I ordered,and the whole experience was 100% perfect. Thank you so much.
Was this helpful?
Thank you for voting!
Ac Would Cool But Compresser Would Not Cycle On &Off
11 of 18 people
found this instruction helpful.
-
Ron from Knob Noster, MO
- Really Easy
- 15 - 30 mins
-
Screw drivers
Replaced the temp control and sensor. Controls on this unit are easy to get to and electrical connections were slide ons
Was this helpful?
Thank you for voting!
Erratic cycling of the compressor.
6 of 11 people
found this instruction helpful.
-
Frank from Prince Frederick, MD
- Really Easy
- 15 - 30 mins
-
Screw drivers
Received the thermost from you in 2 days. (fast and reasonable shipping)
Removed 2 control knobs and front cover.
Removed 2 screws holding controls mounting plate. (About 3 X 6 inches in size)
Removed 2 screws holding thermostat in place.
Installed new trhermostat.
Checked the RAC and all ... Read more was OK.
As a matter of fact, I had to wait for the wife to finish cleaning the front of the RAC.
I am 75years young, retired, repaired appliances for a a short period when I was young before becoming a Factory sales rep. for RCA corp.
I appreciate your fast service and accurately sending me the actual part that I ordered.
Thanks again,
Frank
Removed 2 control knobs and front cover.
Removed 2 screws holding controls mounting plate. (About 3 X 6 inches in size)
Removed 2 screws holding thermostat in place.
Installed new trhermostat.
Checked the RAC and all ... Read more was OK.
As a matter of fact, I had to wait for the wife to finish cleaning the front of the RAC.
I am 75years young, retired, repaired appliances for a a short period when I was young before becoming a Factory sales rep. for RCA corp.
I appreciate your fast service and accurately sending me the actual part that I ordered.
Thanks again,
Frank
Read less
Was this helpful?
Thank you for voting!
main control panel did not work
6 of 13 people
found this instruction helpful.
-
Jose from Upper Darby, PA
- A Bit Difficult
- 1- 2 hours
-
Screw drivers, Wrench (Adjustable), Wrench set
the main control panel had 6 wires pluged in to specific places 3 were for electricity and the other 3 for the AC controls.
Other Parts Used:
Was this helpful?
Thank you for voting!
Seized motor
1 person
found this instruction helpful.
-
Michael from Westwood, MA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Disassembled air conditioner, Removed motor and wiring. Remove wheel and blade. Remove motor from condenser coil housing. Install motor and reassemble after wiring.
Was this helpful?
Thank you for voting!
no on/off knob
1 person
found this instruction helpful.
-
Susan J from Oneonta, NY
- Really Easy
- Less than 15 mins
even I can replace a control knob....
Was this helpful?
Thank you for voting!
none
1 of 2 people
found this instruction helpful.
-
Eunice from Cairo, GA
- Really Easy
- Less than 15 mins
We inserted the batteries and the remote worked like a charm
Was this helpful?
Thank you for voting!
A/C coils would freeze up and unit would not shut off with temperature control.
1 of 2 people
found this instruction helpful.
-
Travis from Locust Grove, GA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
Unplugged unit.
Pulled front cover and removed switch knobs.
Pulled switch plate off and replaced thermostat switch and temperature sensor bulb assembly.
Reassembled and plugged in.
Unit works normal.
Pulled front cover and removed switch knobs.
Pulled switch plate off and replaced thermostat switch and temperature sensor bulb assembly.
Reassembled and plugged in.
Unit works normal.
Was this helpful?
Thank you for voting!
Both motor clips broken - >40 year old dryer!!
1 of 4 people
found this instruction helpful.
-
susan from Socorro, NM
- A Bit Difficult
- 30 - 60 mins
Removed the back - Saw the broken clips on the base of the dryer (the wires to the motor were pulling out because the motor was slipping).
Guessed that the parts were motor clips (no pix in the web site!)
Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of ... Read more bike tire inner tube cut to fit for this.) Attached clips. Works fine!!
(Son is an engineer - he found the problem. Husband is a retired doctor - he couldn't!! but together they
supplied the muscle)
Sue (67 years old)
Guessed that the parts were motor clips (no pix in the web site!)
Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of ... Read more bike tire inner tube cut to fit for this.) Attached clips. Works fine!!
(Son is an engineer - he found the problem. Husband is a retired doctor - he couldn't!! but together they
supplied the muscle)
Sue (67 years old)
Read less
Was this helpful?
Thank you for voting!
I dropped the AC & broke the front panel
0 of 2 people
found this instruction helpful.
-
Chad from Franklin, NC
- Easy
- Less than 15 mins
-
Screw drivers
Repair item was identical to the one I broke and normally I would remove it to clean it anyway. No issues on replacing it. Timely delivery of part that was a bit difficult to trace. 7 year old AC unit.
Was this helpful?
Thank you for voting!
Dosen't seem to fit.Won't go all the way on.
3 of 12 people
found this instruction helpful.
-
David from Nashua, NH
- Very Difficult
- Less than 15 mins
put the knob on and pushed it as far as it would go.
Was this helpful?
Thank you for voting!