ACQ08 Whirlpool Air Conditioner - Parts

This thermostat is for residential air conditioners and is responsible for regulating temperature. The thermostat comes with the clip to attach it to your AC and a visual guide to help with the repair. If your thermostat will not cool properly, or the compressor will not switch on or off, you could have a faulty thermostat. Before you rep...Read morelace your thermostat, remove it from the unit and clear any dust or debris that has built up, because a buildup of dust can interfere with the reading. If the issue continues, you should replace the part. Make sure the power is disconnected to your air conditioning unit before you begin the repair.

The cartridge is a part for your air conditioner and may also be known as a louver assembly. The louver assemblies fit behind the grilles to control the air flow and improve heating and cooling efficiency. If you notice that your air conditioner is not providing the correct temperature, it may indicate an issue with the cartridge. You may...Read more be required to remove the grille in order to make adjustments to the louvers. This part is sold individually. This part is white in color and measures approximately 4 inches by 3 inches. This OEM part comes directly from the manufacturer.

Sold individually.

This is a thermostat temperature control for an air conditioner. The thermostat is the device that controls the air conditioner. A thermostat maintains the set temperature by sensing surrounding air currents and switching heating or cooling devices on or off based on the desired temperature. If your setpoint temperature is not regulated, ...Read moreyou may need to replace your thermostat temperature control. This part is approximately 2.5 inches in diameter and is made mostly of metal. This is a genuine OEM part sourced directly from the manufacturer.

A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it shou...Read moreld be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.