My Orders
ACF7 Amana Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
switch was broken
-
don from gardner, KS
- Really Easy
- Less than 15 mins
-
Nutdriver
simple repair 4 nut screws easy
Was this helpful?
Thank you for voting!
Light bulb failure
-
Grant from Alexandria, VA
- Really Easy
- Less than 15 mins
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Was this helpful?
Thank you for voting!
Burner Would,Nt Heat Up.
-
david from cleveland, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed top of stove replaced heating element ,piece of cake.
Was this helpful?
Thank you for voting!
Stove Range Drawer Difficult to Open and Close
-
Hau from Burke, VA
- Easy
- 15 - 30 mins
-
Nutdriver
Insert one end of the railing into the slot in the back of the stove. Align the front end of the railing with the hole at the front of the stove. Align the roller with the hole. Secure the front end of the railing, roller ,and hole with the shoulder bolt using a 10mm wrench. Tighten just enough but don't over tighten.
Was this helpful?
Thank you for voting!
Burner stopped heating
-
Anna from Copperas Cove, TX
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
My husband did the repair. It was so easy that I could have done it. He had to remove 3 screws and then hook up the element. Nothing to it!!
Was this helpful?
Thank you for voting!
range installer broke a screw off & busted the plastic piece
-
Christina from West Des Moines, IA
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Had to screw off old terminal block & screw on new one
Was this helpful?
Thank you for voting!