- Home
- ACF4205AT-PACF4205AT1
- Instructions
ACF4205AT-PACF4205AT1 Amana Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
drawer wheel completely worn out
4 of 5 people
found this instruction helpful.
-
Antonina from Stony Brook, NY
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
A Home Depot employee advised me on how to enter all my oven information found on the front of my oven on parts.com. I submitted parts information as stated, also very easy. My parts arrived 3 days later. I used a screwdriver & pliers, it took less than 15 minutes. Very simple and the entire process from order to installation went like cl
... Read more
ockwork. I would definitely order in the future. Thank you.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Had to replace a rubber whee that was part of one of the drawer slides.
3 of 4 people
found this instruction helpful.
-
robert from fairport, NY
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
I was surprised when I was able to find that the (10 year old) parts for one of the drawer slides of my stove were still available. However, I was disappointed that the small bolt that I ordered did not come with a nut. I was lucky to find one in a collection of nuts in my workshop, and so was able to fix the slide. However, I suggest
... Read more
that if you supply someone with a bolt, that you include the nut that is necessary to make it work.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Stove Range Drawer Difficult to Open and Close
-
Hau from Burke, VA
- Easy
- 15 - 30 mins
-
Nutdriver
Insert one end of the railing into the slot in the back of the stove. Align the front end of the railing with the hole at the front of the stove. Align the roller with the hole. Secure the front end of the railing, roller ,and hole with the shoulder bolt using a 10mm wrench. Tighten just enough but don't over tighten.
Was this helpful?
Thank you for voting!