Models > ACE124XP0 > Instructions

ACE124XP0 Whirlpool Air Conditioner - Instructions

All Instructions for the ACE124XP0
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
A/C cooling but not cycling.
Unpluged unit from receptacle. Simply slid the unit forward a bit (to get to screws after removing face), removed four screws, pulled the wired sensor from front of grill. Reversed & replaced everything, plugged unit back in and turned on - all working well. Easy job.
Parts Used:
Thermostat
  • Dr H L from KIMBERLING CY, MO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the old thermostat would not on an off
Removed old thermostat replaced it with a new thermostat.
Parts Used:
Thermostat
  • Donald W from GRANITE SHLS, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no on/off knob
even I can replace a control knob....
Parts Used:
Control Knob
  • Susan J from Oneonta, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ACE124XP0
1 - 3 of 3
Back to Top