My Orders
ACE0 Whirlpool Air Conditioner - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
A/C cooling but not cycling.
3 of 3 people
found this instruction helpful.
-
Dr H L from KIMBERLING CY, MO
- Very Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Unpluged unit from receptacle. Simply slid the unit forward a bit (to get to screws after removing face), removed four screws, pulled the wired sensor from front of grill. Reversed & replaced everything, plugged unit back in and turned on - all working well. Easy job.
Was this helpful?
Thank you for voting!
the old thermostat would not on an off
1 person
found this instruction helpful.
-
Donald W from GRANITE SHLS, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed old thermostat replaced it with a new thermostat.
Was this helpful?
Thank you for voting!
no on/off knob
1 person
found this instruction helpful.
-
Susan J from Oneonta, NY
- Really Easy
- Less than 15 mins
even I can replace a control knob....
Was this helpful?
Thank you for voting!
Both motor clips broken - >40 year old dryer!!
1 of 4 people
found this instruction helpful.
-
susan from Socorro, NM
- A Bit Difficult
- 30 - 60 mins
Removed the back - Saw the broken clips on the base of the dryer (the wires to the motor were pulling out because the motor was slipping).
Guessed that the parts were motor clips (no pix in the web site!)
Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of ... Read more bike tire inner tube cut to fit for this.) Attached clips. Works fine!!
(Son is an engineer - he found the problem. Husband is a retired doctor - he couldn't!! but together they
supplied the muscle)
Sue (67 years old)
Guessed that the parts were motor clips (no pix in the web site!)
Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of ... Read more bike tire inner tube cut to fit for this.) Attached clips. Works fine!!
(Son is an engineer - he found the problem. Husband is a retired doctor - he couldn't!! but together they
supplied the muscle)
Sue (67 years old)
Read less
Was this helpful?
Thank you for voting!
Dosen't seem to fit.Won't go all the way on.
3 of 12 people
found this instruction helpful.
-
David from Nashua, NH
- Very Difficult
- Less than 15 mins
put the knob on and pushed it as far as it would go.
Was this helpful?
Thank you for voting!