ACBL DeVilbiss Compressor - Parts

This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions and does not turn the motor off when the amount of pressure is met, the safety valve will open to release the extra air pressure. The amount of pressure required to open the safety valve is set by the...Read more tension of the spring inside the valve. The spring can wear out, and leave the valve open at a lower pressure than what is set to turn the switch off, and will not allow pressure to build inside the tank. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is a genuine manufacturer-sourced kit which is specially designed for Porter Cable and DeVilbiss air compressors. This kit contains all the necessary gaskets and other parts necessary to repair your equipment. It helps to fix common problems associated with leaks, sluggish performance, and other pump related issues. Please make sure ...Read moreto refer to the appropriate diagrams for your model perform this repair. A screwdriver, a wrench set, and pliers might be needed to replace these components.

This is a genuine replacement screw which is supplied directly from the original equipment manufacturer for use with Craftsman air compressors. This hex head screw has multiple applications, please make sure to check appropriate diagrams of your model for the correct location and use of this hardware. Note this high-quality metal screw is sold individually.

Used to secure the wheels on a compressor or generator, this Shoulder Bolt is roughly 3.75 inches long and is sourced directly from the original equipment manufacturer. It is made of dark grey metal, is not part of a kit or assembly, and is sold individually. This part needs to be replaced when it is damaged or worn and may cause the w...Read moreheel to fall off if it breaks. You will need a wrench or socket to complete this repair. Customers rate this repair as Easy.

This is an OEM part sourced directly from the manufacturer. The adapter is designed for use in compressors from DeVilbiss, Black & Decker, Delta, and Porter Cable. This part is made of metal, and may be used to connect the regulator to the tank. You will require a wrench when replacing this part. This item is sold individually.

This is a genuine Craftsman replacement gasket, it is supplied directly from the original equipment manufacturer for use with air compressors. It is the special component which helps to provide an air-tight seal for the cylinder head assembly, over time the gasket may wear out and crack eventually requiring a replacement to maintain peak ...Read moreperformance. This high-quality part is made of durable composite material and it is sold individually.

This is a Genuine Manufacturer Approved replacement part designed to work with a variety of Air Compressors. The pressure switch tells your compressor when to stop and when to start. There are multiple reasons a Pressure Switch could be leaking air. If it is leaking air the Pressure Switch should be replaced for a compressor to operate properly and safely.

This is a genuine replacement part sourced from the original manufacturer for use with air compressor made by Devilbiss and Porter Cable. This spins the compressor pump shaft drive components to pressurize the air in the tank. It is recommended to review your models diagram to verify the parts compatibility. This part is made of durable material and sold individually.

This gasket is an OEM part direct from Craftsman for air compressors. This part creates a seal in in the middle of the base and the crankcase. You may need a wrench to replace this part. This gasket is made of durable material and sold individually.

This kit has been sourced from the original manufacturer to be used with air compressors from Porter Cable, DeVilbiss, and Delta. Overtime gaskets can become worn and may need to be replaced. It is recommended to apply new gaskets when servicing the compressor to ensure the parts are properly sealed when they are reassembled. This kit is sold complete, including all the items that are photographed.