Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken Thermostat Knob
2 of 4 peoplefound this instruction helpful.
Kathy from Fremont, OH
Really Easy
Less than 15 mins
After ordering 3 or 4 different knobs for replacement, I found the one I needed. I did not have the oven model number at first...now everything is working fine. No tools, just push the knob into place. Thanks!
Was this helpful?
Thank you for voting!
35 year old range. grates too dirty to clean. Parts Select had exact replacement grates. Perfect fit.
1 personfound this instruction helpful.
FRANCES from AFFTON, MO
Very Easy
Less than 15 mins
Easy, removed from box, put in place on range. Happy customer. Good company to find exact replacement parts.
Was this helpful?
Thank you for voting!
my knobs were broken on 30 year old range
1 personfound this instruction helpful.
Larry from LAWTON, MI
Very Easy
Less than 15 mins
Pliers
I took a pair of channel locks pulled the old one off pushed the new one on they look really nice and was glad they had the parts for such an old stove. thank you,now my hubby is glad so he doesn't have to buy a new stove.
Was this helpful?
Thank you for voting!
Old seal breaking off oven door. Oven not baking food well, wasting heat and fuel.
1 personfound this instruction helpful.
Mz from COLUMBIA, ME
Very Easy
Less than 15 mins
Pliers
Used pliers to remove clips and old seal. Snap in new seal. DONE! Less than 5 mins.
Was this helpful?
Thank you for voting!
The oven bottom was warped and could not be positioned properly in the oven.
1 personfound this instruction helpful.
Tara from ALBANY, NY
Easy
15 - 30 mins
Removing the old oven bottom was easy...as it was already outside of its slots. Installing the new one was pretty easy. I placed the oven bottom in the front slots first...then the rear slots...no tools necessary.
Was this helpful?
Thank you for voting!
Simply remove and install new parts
1 personfound this instruction helpful.
Jacob from LITTLE CANADA, MN
Really Easy
15 - 30 mins
Overall, it was painless and easy with zero problems
Was this helpful?
Thank you for voting!
The burners were old and loose
2 of 4 peoplefound this instruction helpful.
James R. from Corona, CA
Really Easy
Less than 15 mins
First, I raised the top. Extracted the holding pin, Then replaced the burner. Then reinserted the holding pin. Two minutes top's.
I took pliers to get the old one off, and popped the new one back in its place, and it fit perfect.
Was this helpful?
Thank you for voting!
Old and corroded drip pans
1 of 2 peoplefound this instruction helpful.
Veronica from Miami Beach, FL
Really Easy
Less than 15 mins
Furtunately, it was just a replacement of the drip pans. It changed the entite looks of my range for under $ 25.00 dollars. Very satisfied!
Was this helpful?
Thank you for voting!
Temperature numbers were worn off the old oven knob
2 of 5 peoplefound this instruction helpful.
Rena from Cedar Rapids, IA
Really Easy
Less than 15 mins
I pulled the old knob off and popped the new one on! It was easy as pie! The shipping was amazingly fast; I ordered the part on Easter Sunday and it was on my doorstep on Tuesday! Great service!
Was this helpful?
Thank you for voting!
Thermostat bulb was hanging loose
2 of 5 peoplefound this instruction helpful.
Willi from Old Saybrook, CT
Really Easy
Less than 15 mins
Pliers
Removed what was left of the original clips. Pressed in the new clips and snapped in the themostat blub
Was this helpful?
Thank you for voting!
Drip pans were rusted. I had shopped for replacements at local appliance stores without finding them.
1 of 2 peoplefound this instruction helpful.
Norma J from Philadelphia, PA
Really Easy
Less than 15 mins
Removed the rusted drip pans and replaced them with the new pans. Range looks great and ready for many more years of use!
Was this helpful?
Thank you for voting!
Needed to replace two stove valve knobs.
1 of 2 peoplefound this instruction helpful.
Roberta from BROOKLYN, NY
Really Easy
Less than 15 mins
Inserting two stove valve knobs took 10 seconds! No tools necessary.
Was this helpful?
Thank you for voting!
The floor panel of the oven was pocked and in bad shape
2 of 6 peoplefound this instruction helpful.
Roger from San Juan Capistrano, CA
Really Easy
Less than 15 mins
I found the panel on the innernet, ordered it and when it arrived I removed the old one and replaced it with the new one.
My Orders
