My Orders
A233W6LPX Maytag Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
leak
12 of 14 people
found this instruction helpful.
-
George from Plainville, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
removed then installed new unit by hand. received order the next day-am. delivery time great.
Was this helpful?
Thank you for voting!
30 year old gas stove needed a new burner assembly.
6 of 7 people
found this instruction helpful.
-
Caroline from South Windsor, CT
- Really Easy
- Less than 15 mins
We lifted up the stove top, slipped the burner assembly in. It fit! who knew that we could get a part to an old stove without the model number, just by looking at a picture of the part! Terrific!
Was this helpful?
Thank you for voting!
Gas manifold had holes in it.
5 of 6 people
found this instruction helpful.
-
Mr. J.C. from Haines City, FL
- Really Easy
- Less than 15 mins
Removed locking wire from bottom burner assembly then I pulled the element out and replaced with the new one.
Was this helpful?
Thank you for voting!
Heat was escaping from my oven and really heating up my house
5 of 8 people
found this instruction helpful.
-
Patricia from Sanger, TX
- Really Easy
- Less than 15 mins
The heat sealing strips are elastic type material with hooks on each end. I simply removed the old strips and hooked the new ones in place.
It was easier than I ever dreamed possible!
And my kitchen is now nice and cool.
Pat Morrison
Sanger TX
It was easier than I ever dreamed possible!
And my kitchen is now nice and cool.
Pat Morrison
Sanger TX
Was this helpful?
Thank you for voting!
Freont Burners Of Both Units Had Rusted Though Over The Years Of Boilover.
3 of 4 people
found this instruction helpful.
-
Angelo W. from Chirfland, FL
- Really Easy
- Less than 15 mins
Lifted lid, removed old burner units, replace with new ones. In less than two min. Was back up and cooking.
Was this helpful?
Thank you for voting!
A seal came off the oven
3 of 5 people
found this instruction helpful.
-
andrea from new york, NY
- Really Easy
- Less than 15 mins
I found the model, ordered the new seal, it arrived very quickly via mail and I replaced the seal. You simply slid off the old, slid on the new one and hooked it in place. No expensive repairman!
Was this helpful?
Thank you for voting!
needed to replace a side oven door seal
3 of 7 people
found this instruction helpful.
-
Robert from Lebanon, NH
- Easy
- Less than 15 mins
The trickiest part was making sure that the correct part was ordered. The first attempt was a failure. The seal was too long and the clips were too big.
After finding the correct part it was a breeze.
After finding the correct part it was a breeze.
Was this helpful?
Thank you for voting!
missing clock knob
1 of 3 people
found this instruction helpful.
-
Jimmie from Hampton, VA
- Really Easy
- Less than 15 mins
placed knob on clock shaft with my fingers
Was this helpful?
Thank you for voting!
Door gasket broken
-
Tim from North Hills, CA
- Really Easy
- Less than 15 mins
This part showed up so fast I couldn't believe it. Took longer to unwrap the package than to install the gasket.
Was this helpful?
Thank you for voting!