My Orders
A126 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave oven bulb had burned out
1 of 2 people
found this instruction helpful.
-
Deidre from Brownsville, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
My Dearest One removed the screws that held the part that covers the bulb; removed the old bulb, put in the new bulb and replaced the cover.
The whole operation took less than 5 mins.
Thank you.
The whole operation took less than 5 mins.
Thank you.
Was this helpful?
Thank you for voting!
Remove 6 screws, lift off glass, unplug burned out burner, plug in new burner, reverse order to put back together.
1 of 2 people
found this instruction helpful.
-
Richard from HALLSTEAD, PA
- Really Easy
- 15 - 30 mins
-
Nutdriver
As above.
Was this helpful?
Thank you for voting!
the burner didn't work and digital part too
8 of 24 people
found this instruction helpful.
-
Eduardo from Lenexa, KS
- Easy
- 30 - 60 mins
-
Wrench set
I used the digital multimeter for measure the voltage in the burner and in the digital part,I saw the electric cables
Was this helpful?
Thank you for voting!
Beingold the glass top stuck hard
-
Mansukhlal Dayabhai from Moultrie, GA
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers
unscrew 3 screws under the control panel and pull that away from the glass top making sure the wires don't come apart from the connectors. care fully slide the glass forward and replace the burner which was the easy part. DO NOT try to test without making sure that none of the burner are touching the metal surface!!!!!!!! it will trip you
... Read more
r breaker. But now we have a range with 4 burner after a year THANKS
Read less
Was this helpful?
Thank you for voting!