Our Jenn-Air cook top is 25 years old. One can no longer order parts for this old of model. We ordered new SS burners as well as new Burner cartridge terminal blocks for a new and current model. They work perfectly. Took 10 minutes. $ 350 dollars verses $ 2600 for a new JennAir range plus instillation. Unit looks and works great. Pla
... Read moren to order new switches next.
Read less
Was this helpful?
Thank you for voting!
burned out heating element
10 of 11 peoplefound this instruction helpful.
randy from manitou springs, CO
Really Easy
Less than 15 mins
part came quickly and fit perfect... everything works great...pretty simple repair... nice to have the right part and have it arrive so quickly
Was this helpful?
Thank you for voting!
one side of cooktop did not work
10 of 14 peoplefound this instruction helpful.
Rebecca from Broadway, NC
Really Easy
15 - 30 mins
Nutdriver, Screw drivers
I took out the side of the cooktop that did not work. I had to take off the bottom of the cooktop and checked where electricity was going and not going. Once I found the part that needed replacing, I went on the website, search for Jen-Air cooktops and model number. From the sketch on the website, I was able to order the part needed. I de
... Read morecided to get 2 in order to replace both parts at one time, just in case. The part arrived quickly and was easy to install. The most time I spent was taking the backside off the cooktop and cleaning it.
Read less
Was this helpful?
Thank you for voting!
cook top module would not heat.
8 of 10 peoplefound this instruction helpful.
Daryl from Olathe, KS
A Bit Difficult
More than 2 hours
Nutdriver, Screw drivers
The contact spades were burned from 10+ years of use and the cook top module was worn. I disassembled the module, taped the top to protect the creamic cook top, sanded the metal and spray painted to restore the original white finish. On the bottom half I replaced one missing pop rivet and cleaned and spray painted the bottom to restore to
... Read more the original black. When the contact spades arrived, I replaced the contact spades and reassembled the module. It now works and looks like it did when it was new.
Read less
Was this helpful?
Thank you for voting!
the element plugged in, stove was woking right away.
5 of 5 peoplefound this instruction helpful.
James from Frederick, MD
Really Easy
Less than 15 mins
The element plugged in to the cook- top.The cook -top was working moments after i unpacked the element. thank you.
Jim B.
Was this helpful?
Thank you for voting!
The element burned out
5 of 6 peoplefound this instruction helpful.
Diane from Orlando, FL
Really Easy
Less than 15 mins
Just replaced the element and put new rock grate supports on the rock grates and we're set to grill
Nearly 29 year old grill element was broken and not heating properly.
3 of 4 peoplefound this instruction helpful.
Robert from Venice, FL
Really Easy
Less than 15 mins
Unplugged and removed the old grill element by hand and installed the replacement element by plugging it into the socket. Tools were not required for this and it took less than five minutes. The new element is great and heats much better than the original did before it broke.
Was this helpful?
Thank you for voting!
Element failed
4 of 7 peoplefound this instruction helpful.
Andrew from Salem, IN
Really Easy
Less than 15 mins
Simple plug in.
Was this helpful?
Thank you for voting!
A local repair shop informed the individual that the burner unit could not be repaired and she would have to replace the cooktop..
2 of 2 peoplefound this instruction helpful.
Sonny from MOUNT VERNON, GA
Very Easy
Less than 15 mins
Screw drivers, Socket set
After examining the burner unit I noticed that one of the male contact spades was burned and look deformed. After removing the spade I discovered that it had been originally manufactured incorrectly. I went on line to try and find the part. I found it at this site . I ordered 2 of the spades and replaced the deformed spade and anothe
... Read morer one that looked like it had gotten a little hot. She tried the unit and it worked perfectly. She had not used that burner unit for a very lengthy time. The investigation of the problem took a little time, but the repair went very fast. Moral is :" If a spade doesn't look right, it probably isn't", but either the individual spade or plug can be replaced. This site is now my "GO TO" place for parts.
Read less
Was this helpful?
Thank you for voting!
Grill elemnt on ancient Jenn-Air died
3 of 5 peoplefound this instruction helpful.
John from York, PA
Really Easy
Less than 15 mins
Just replaced old with new, it plugs in same as old.
Was this helpful?
Thank you for voting!
Dull blade
2 of 3 peoplefound this instruction helpful.
Robin from BIRCH RUN, MI
Very Easy
15 - 30 mins
Socket set
Disconnected spark plug wire laid lawn mower in side removed blade bolt took off old blade put new blade on tightened it reconnected spark plug wire
Was this helpful?
Thank you for voting!
burner cartridge terminal broke due to electrical shock. circuit shortage caused the problem.
1 personfound this instruction helpful.
Ge from Solon, OH
Really Easy
Less than 15 mins
Nutdriver, Screw drivers, Socket set
dissembled the burner, remove the broken blocpk and bad spade.rewiered and assembled the burner.
My Orders
