- Home
- 96139000400
- Instructions
96139000400 Poulan Lawn Mower - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Engine died just a few minutes after running
7 of 8 people
found this instruction helpful.
-
Jeff from PIEDMONT, SC
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
Changed the spark plug, carburetor, Head gasket,Air filter, but when I replaced the magneto I got real results. So if you have a small engine that dies just as it warms up the magneto may be the problem. Cut my grass finally.
Other Parts Used:
Was this helpful?
Thank you for voting!
Original rear skirt was torn and loose at each end.
2 of 4 people
found this instruction helpful.
-
Steven from SPOKANE, WA
- Easy
- 15 - 30 mins
-
Wrench set
Prop up mower with wood blocks just enough to unbolt and remove rear wheels. Flip up spring-loaded rear baffle and prop up with yardstick positioned between baffle and mower push bars. Now you have access to unbolt and replace skirt.
Was this helpful?
Thank you for voting!
Push mower leaked under neath.
1 person
found this instruction helpful.
-
Raymond from Coalport, PA
- Easy
- 15 - 30 mins
-
Pliers, Socket set
Pulled the old seal out, replaced it with seal #391483S and so far looking good !
Was this helpful?
Thank you for voting!
Recoil broke apart
1 of 4 people
found this instruction helpful.
-
Dexter from MAULDIN, SC
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers, Wrench set
Removed cover then it required removing the broken recoil assembly to replace it with new one. New recoil assembly fit perfectly.
Was this helpful?
Thank you for voting!
Screw in new dipstick, check oil level
5 of 18 people
found this instruction helpful.
-
Kim from KENNER, LA
- Very Easy
- Less than 15 mins
Very well
Was this helpful?
Thank you for voting!
My lawn mower blade wouldn’t stay in place. The old blade adapter had worn down and broken.
3 of 19 people
found this instruction helpful.
-
Joel from ROSEVILLE, MN
- Very Easy
- Less than 15 mins
-
Socket set
I took off the old blade adapter and put the new one on. It literally requires removing one bolt. Unfortunately, once I started and ran my mower for a few minutes it blew up and left a charred patch of lawn. The underside of the mower is mangled metal and unusable now. The repair, though, was super easy!
Was this helpful?
Thank you for voting!