96043003300 (2008-10) Husqvarna Lawn Mower - Instructions

Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat ... Read more other side.

Still not able to complete repair, unfortunately the box part was shipped in had a gaping hole in the bottom and some parts are missing. Trying to salvage from old mower deck.

Just described it.

Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats.

Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c ... Read more ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.

Shimmed the wheels out on axle.. No more slop.