932025 (008000) Ariens Snow Blower - Parts

The Runner is a 6 x 3.5 inch, orange, metal part which is used to allow the snowblower to glide smoothly on the ground. It's installed using a wrench or socket, and its installation has been rated "Easy" by customers. If broken, the auger housing will drag on the ground and the part should be replaced. Refer to your make, model and diagram to ensure this is the correct part.

This chute gear in your snowblower is a plate-like part found in the discharge chute crank mechanism. It is responsible for controlling the movement of the chute, allowing you to direct the snow being discharged. The gear attaches to the chute and is rotated by a pinion gear. If the chute gear is broken, you may notice chipped or missing ...Read moreteeth on the gear. It may also have difficulty rotating smoothly or become stuck, making it challenging or impossible to adjust the chute. To remove the chute gear, you will need a socket and a screwdriver. Start by removing the gear cover, which is typically secured with screws. Once the cover is removed, you will have access to the chute gear assembly. Remove any necessary components until the chute gear is free to be lifted off its shaft. When replacing the chute gear, it is important to note that it is sold separately from any accompanying hardware or fasteners.

This OEM flange bearing in your lawn equipment supports smooth movement in the gear case and impeller. It reduces friction and ensures stability for rotating components like gears or impeller shafts. If the flange bearing is damaged, you may hear grinding or squeaking sounds, and it may show signs of cracks, wear, or deformation. Neglecti...Read moreng a broken flange bearing can lead to additional damage to the gear case and impeller assembly, potentially causing equipment failure. To remove a faulty bearing, turn the machine off and disconnect it from any power source. Remove any covers, guards, or components that provide access to the gear case and impeller assembly. This may involve loosening screws, bolts, or clips. Consult your user manual to locate the flange bearing. Use a screwdriver or wrench to remove any fasteners that secure the flange bearing before detaching the bearing itself. Please note that this flange bearing is sold individually and does not include any accompanying hardware.

This is an authentic Ariens replacement part manufactured for use with snow throwers. The special scrapper attaches to the bottom of the back of the auger housing and used to collect snow from the ground to be fed into the auger. This scraper is a wear item because it wears against the ground during use. Replacing the scrapper is part of normal maintenance, please note the scrapper is sold individually.

It is a genuine OEM sourced part that is designed for use with Ariens snow blowers and lawn tractors. This is a special component that helps to secure the bearing. It is a high-quality replacement for a faulty or a missing bearing flange that was installed on a new unit. To ensure the exact location and the correct installation of this ha...Read morerdware make sure to check the appropriate diagrams of your model. This authentic bearing flange is made of durable metal and is sold individually.

This Oil Seal comes individually sold, and is rated as "Hard" to install. It is used to seal the gearcase and allow the axle to pass the gearcase housing. You will need a screwdriver, socket set, wrench set, nutdriver, roll pin punch, seal puller and ger puller to properly install and use this part (Tip: tap the seal into place). It atta...Read moreches on the gear case around the axle shaft. If worn or damaged the part may leak oil, and this is a sign the part is broken and must be replaced. The seal is metal, and comes in black/brown. Refer to your make, mode and diagram to ensure this is the correct part.

This manufacturer-sourced replacement screw is designed for use with Ariens snow blowers and throwers. As a standard hardware component, it has multiple potential applications depending on the model. Made of durable metal, this part is sold individually. A wrench is required to tighten or loosen the screw during installation or removal. For proper use and placement, please refer to your equipment’s diagrams.

This is an authentic manufacturer-sourced part which is specially designed for use with Ariens lawn and garden equipment. It is an identical replacement for a missing or damaged ball bearing that was installed on a new unit. The bearing allows connected part to rotate with minimum friction, unfortunately, over time components will wear ou...Read moret and may begin to fail eventually requiring a replacement. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an authentic OEM part. This key is made of molded plastic and metal and is designed for use with Ariens snowblowers and snow tractors. It is used to start the machine and functions as a safety feature to prevent unauthorized use. This item is sold individually.