926313 Ariens Snow Blower - Parts

This OEM-sourced flange bushing supports smooth movement in your lawn equipment by reducing friction. This bearing has an inner diameter of 0.625 inches, an outer diameter of 0.750 inches, a width of 0.5 inches, and a flange diameter of 0.875 inches. Depending on the model and make of your machine, this bushing can be found in various par...Read morets of your machine, such as pivot points, axles, and spindles. A damaged bushing causes increased friction, misalignment, and grinding or squeaking noises. Your machine may need expensive repairs and may eventually fail if you do not replace a broken bushing. To remove an existing bushing, you need to remove components that provide access to the flange bearing. Consult your user manual if needed. Locate the bearing and use a screwdriver or wrench to remove any clips, screws, or bolts securing it. Use a bearing puller tool or a mallet to pull or tap the bearing out of your machine if necessary. Please note that the bushing is sold individually.

This OEM flange bearing in your lawn equipment supports smooth movement in the gear case and impeller. It reduces friction and ensures stability for rotating components like gears or impeller shafts. If the flange bearing is damaged, you may hear grinding or squeaking sounds, and it may show signs of cracks, wear, or deformation. Neglecti...Read moreng a broken flange bearing can lead to additional damage to the gear case and impeller assembly, potentially causing equipment failure. To remove a faulty bearing, turn the machine off and disconnect it from any power source. Remove any covers, guards, or components that provide access to the gear case and impeller assembly. This may involve loosening screws, bolts, or clips. Consult your user manual to locate the flange bearing. Use a screwdriver or wrench to remove any fasteners that secure the flange bearing before detaching the bearing itself. Please note that this flange bearing is sold individually and does not include any accompanying hardware.

The ball bearing goes next to the bearing flange and is made of metal. Keep in mind this high-quality part is priced individually. It is a genuine item that is supplied by the original equipment manufacturer for use with Ariens snowblowers. During replacement, it may require a socket set to help install this part correctly. It will require replacing if it breaks.

It is a genuine high quality seal that is supplied from original equipment manufacturer for use with Ariens snowblowers. This is one of the seals for the gearcase, please make sure to check appropriate diagrams for correct location and use of this hardware. One durable rubberized metal seal is included per order.

This torsion spring is a genuine OEM replacement designed for snow throwers and walk-behind outdoor power equipment. It provides the controlled tension needed for proper operation of safety and control mechanisms, helping ensure smooth, reliable performance. Made from durable metal for long service life, it’s an ideal replacement when a f...Read moreatigued or broken spring causes poor control response or reduced equipment reliability.

This L-3 synthetic severe-duty gear lube is specially produced for use on Ariens snow blowers. It is used to lubricate gearbox gears that help to drive the unit. This is an authentic OEM sourced item that is sold individually.

A spark plug is used to deliver electric current to the internal combustion engine. Over time spark plugs tend to become dirty or fouled eventually requiring replacement. The spark plug gap should be set in accordance with the owners manual of the outdoor product you have. You will need a spark plug wrench or a socket wrench to remove or install the spark plug.

It is a genuine OEM sourced part that is designed for use with Ariens snow blowers and lawn tractors. This is a special component that helps to secure the bearing. It is a high-quality replacement for a faulty or a missing bearing flange that was installed on a new unit. To ensure the exact location and the correct installation of this ha...Read morerdware make sure to check the appropriate diagrams of your model. This authentic bearing flange is made of durable metal and is sold individually.

This authentic item is supplied by the original equipment manufacturer for use with Ariens snowblowers It is an identical replacement for a missing or a faulty cable that was installed on a new unit. The purpose of this component is to allow a user to adjust the deflector, please make sure to refer to the owners manual and the appropriate...Read more diagrams of your model for the correct application of this part. Keep in mind this high-quality rubber insulated metal cable is sold individually.