92501 - Parts

This is genuine OEM sourced part and is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or damaged spring that was originally installed on a new unit. The purpose of this hardware is to apply tension on the exhaust and intake valves. ...Read moreMake sure to refer to the owners manual and the appropriate diagrams of your model for the correct installation of this component. This high-quality spring is made of durable metal and is sold individually. To replace it, you will need to unscrew and remove the cylinder head. This will allow you to take out the valve and replace the spring.

This replacement muffler/shield assembly is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines that are commonly installed on lawn and garden equipment. The purpose of a muffler is to reduce the noise from the engine's exhaust. Over time it may wear out and it can get clogged eventually req...Read moreuiring a replacement to ensure engine's peak performance. It is a high-quality metal body component which is sold individually. A small wrench will be needed to perform this repair.

This is an authentic manufacturer-sourced replacement gasket which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is generally utilized to provide an air-tight seal for the breather, please make sure to check the appropriate diagrams of your model for the correct applicat...Read moreion of this hardware. Over time it may wear out and begin to fail eventually requiring a replacement.

This replacement bolt is sourced from original equipment manufacturer for use with Ariens snow blowers/throwers. It is a standard hardware which has multiple applications based on your unit. This bolt is designed with a square area under its head which allows the bolt to stay secure while the lock nut is tightened. It is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with small engines. The special starter rope includes the rope handle and is used to engage the starter pulley to start the engine. This rope kit is available as an individual replacement part, please see model diagram for associative parts.

This OEM part is a zerk fitting that is sometimes called a grease fitting, lube fitting, grease zerk, or Alemite fitting. It is a metal nipple that you connect a grease gun to, allowing you to lubricate the moving parts in your lawn equipment, usually on joints or bearings. This fitting is 1/4 inch wide, has 28 threads per inch, and a thr...Read moreeaded portion that is .256 inches long. If the fitting is broken, you may notice that your machine is moving sluggishly, or the fitting may appear cracked or clogged with debris. It is important to replace a damaged fitting right away, because if you do not, debris can prevent the fitting from accepting grease and the moving parts of your machine will wear out faster and eventually break down completely. To replace the fitting, you will need to use a wrench to remove it from your machine. Keep in mind that this replacement part is sold separately, so you may want to consider stocking up on fittings before you need them. Since the fittings on your machine wear out at the same rate, having a few extra on hand can save you time and hassle down the road.

For Models 57