924321 (000101) Ariens Snow Blower - Parts

This is a genuine OEM sourced replacement part which is specially designed for use with Ariens lawn and garden equipment. This is a standard hardware which has multiple applications based on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this item. Keep in mind this high-quality item is made of durable metal and is sold individually.

This replacement scraper blade is supplied directly from original equipment manufacturer for use with Ariens snow blowers. These scrapers scrapers are designed to clear the ground from the leftover snow. Because this part is constantly grinding against the concrete and other surfaces it will wear out over time requiring replacement. Gener...Read moreally you will be able to tell that the scraper is worn, because it leave patches of snow behind the blower. Please note, paddles and scrapers are designed to wear at approximately the same rate, so it\\\'s always a good idea to replace them both at the same time. This steel scraper blade is sold individually. Replacing it is a simple task that will require a wrench. • Disconnect the spark plug • Remove the scraper bolts • Remove the old scraper • Press the new scraper onto the lip of the impeller • Secure the scraper using the hardware

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It helps secure the skid shoe runner to the deck and is engineered to resist loosening when properly threaded onto a bolt, ensuring a stable and reliable connection. Made from durable metal, this high-quality part is sold individually. For safe installation, be sure to use a properly sized wrench.

This Bearing Cup is a genuine replacement part for various models of snow blowers. It is used to carry the maximum combinations of radial and thrust loads simultaneously. It is made of metal, is silver, is not part of a kit or assembly, and is sold individually. This part may make a grinding noise when it is malfunctioning. It should be...Read more replaced when it is visibly worn or damaged. It is found on the helicon shaft with the Cone Bearing and Adjustment Plug. You will need a screwdriver, pliers, a socket set, and a wrench set to complete this repair. Customers rate this repair as Medium difficulty.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Ariens snowblowers. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality screw is made of durable metal and is sold individually. You will need a hex key also known as an Allen wrench to secure or remove it.

This replacement bolt is sourced from original equipment manufacturer for use with Ariens snow blowers/throwers. It is a standard hardware which has multiple applications based on your unit. This bolt is designed with a square area under its head which allows the bolt to stay secure while the lock nut is tightened. It is sold individually.

This OEM part is a zerk fitting that is sometimes called a grease fitting, lube fitting, grease zerk, or Alemite fitting. It is a metal nipple that you connect a grease gun to, allowing you to lubricate the moving parts in your lawn equipment, usually on joints or bearings. This fitting is 1/4 inch wide, has 28 threads per inch, and a thr...Read moreeaded portion that is .256 inches long. If the fitting is broken, you may notice that your machine is moving sluggishly, or the fitting may appear cracked or clogged with debris. It is important to replace a damaged fitting right away, because if you do not, debris can prevent the fitting from accepting grease and the moving parts of your machine will wear out faster and eventually break down completely. To replace the fitting, you will need to use a wrench to remove it from your machine. Keep in mind that this replacement part is sold separately, so you may want to consider stocking up on fittings before you need them. Since the fittings on your machine wear out at the same rate, having a few extra on hand can save you time and hassle down the road.

This tension spring is a genuine OEM replacement designed for snow blowers and lawn mowers. It helps maintain proper tension on drive belts, supporting smooth engagement and reliable operation during use. Made from durable metal, it’s an ideal replacement when a worn or stretched spring causes slipping, poor drive performance, or inconsistent belt tension.