922021 (000101) Ariens Snow Blower - Parts

Used to deliver power to the pulleys and shafts to operate machinery, this OEM replacement belt is made of durable black rubber and sold individually, not as part of a kit or assembly. It is 32 inches long and is used on a variety of equipment. When the belt begins to wear or crack, you will lose power on the component it is supplying p...Read moreower to. At which point, it will need to be replaced. Before removing the belt, take a photo of how the belt is routed on the pulleys to make installation easier. Customers rate this repair difficulty as Medium.

This replacement bolt is sourced from original equipment manufacturer for use with Ariens snow blowers/throwers. It is a standard hardware which has multiple applications based on your unit. This bolt is designed with a square area under its head which allows the bolt to stay secure while the lock nut is tightened. It is sold individually.

This OEM part is a zerk fitting that is sometimes called a grease fitting, lube fitting, grease zerk, or Alemite fitting. It is a metal nipple that you connect a grease gun to, allowing you to lubricate the moving parts in your lawn equipment, usually on joints or bearings. This fitting is 1/4 inch wide, has 28 threads per inch, and a thr...Read moreeaded portion that is .256 inches long. If the fitting is broken, you may notice that your machine is moving sluggishly, or the fitting may appear cracked or clogged with debris. It is important to replace a damaged fitting right away, because if you do not, debris can prevent the fitting from accepting grease and the moving parts of your machine will wear out faster and eventually break down completely. To replace the fitting, you will need to use a wrench to remove it from your machine. Keep in mind that this replacement part is sold separately, so you may want to consider stocking up on fittings before you need them. Since the fittings on your machine wear out at the same rate, having a few extra on hand can save you time and hassle down the road.

This is an authentic manufacturer-approved replacement part which is specially designed for use with Ariens lawn and garden equipment. It helps to distribute the pressure and provide a tight seal between the connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and applications of th...Read moreis hardware. Over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality gasket is made of durable material and is sold individually.

This flat idler kit guides the back side of a drive belt and helps keep the belt on the correct path. Replace the idler if the original wheel, bearing, spacer, or mounting hardware is worn, loose, seized, or damaged. Review the kit contents before starting the repair. The wheel diameter, width, bearing opening, offset, belt surface, and m...Read moreounting style must match. Check the equipment manual and compare the complete original idler setup before ordering. Before buying, review the machine's parts list and make sure each listed size and feature matches the part you are replacing.