My Orders
919-72412 (Type 2) Black and Decker Compressor - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Worn piston rod and sleeve
7 of 11 people
found this instruction helpful.
-
Donald from BRYAN, TX
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
Disassemble plastic housing around compressor unit using appropriate tools. Remove the four bolts from the compressor head using a 5/16 nut driver. Carefully remove head assembly including airline. Remove bolt through rod bearing with Allen wrench.
Reassemble with new rod and piston assembly. Best to use blue locktite on bolt ... Read more through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Reassemble with new rod and piston assembly. Best to use blue locktite on bolt ... Read more through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Read less
Was this helpful?
Thank you for voting!
Broken ground on original plug
2 of 2 people
found this instruction helpful.
-
Debra from PRESCOTT VLY, AZ
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed cover & old cord.
Replaced with new cord & replaced cover.
Works perfect.
Replaced with new cord & replaced cover.
Works perfect.
Was this helpful?
Thank you for voting!
The compressor was getting air
3 of 7 people
found this instruction helpful.
-
Linda from CARO, MI
- Really Easy
- 30 - 60 mins
-
Screw drivers, Socket set, Wrench set
Put the seal in and it ran like a champ. No vacuum leak and it now runs again!
Was this helpful?
Thank you for voting!