My Orders
919-16755 (0) Craftsman Compressor - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Can't find this special screw used on many housings etc
4 of 6 people
found this instruction helpful.
-
Tim from Tucson, AZ
- Very Easy
- 15 - 30 mins
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called ... Read more AGC-408 by craftsman.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called ... Read more AGC-408 by craftsman.
Read less
Was this helpful?
Thank you for voting!
Older compressor runs but no longer builds pressure
2 of 2 people
found this instruction helpful.
-
Cary from SAGLE, ID
- Really Easy
- 30 - 60 mins
-
Screw drivers, Socket set
After replacing the piston, cylinder sleeve and O-rings, the old compressor works like a champ. The hardest part was getting the nut loose holding the piston & bearing in place. Two socket wrenches and a big hammer was able to break the nut loose and get it off.
Was this helpful?
Thank you for voting!