- Home
- 91193408991
- Instructions
91193408991 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The burner would not turn off and I or my wife would have to turn the breaker off.
2 of 2 people
found this instruction helpful.
-
Mark from WOOSTER, OH
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
I simply turned the power off and slide the stove forward to give myself room to get behind it and just unscrewed the cover behind the burner switchers and pulled the switch knob off then I removed the two small screws that hold the burner switch to the control panel and go to the back and pull the wires carefully and replace them on the
... Read more
new switch one by one and screw the new switch to the control panel and replace the back panel and done!
Read less
Was this helpful?
Thank you for voting!
Top glass top burner wasn’t working
2 of 2 people
found this instruction helpful.
-
Robert from PAWTUCKET, RI
- Very Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
I first ordered the wrong part and had to call customer service. They handled the return and ordered the new piece beautifully!! The installation was really simple. Once I took out two screws holding the top down, I removed three clips holding the burner on then switched out the electrical leads. Put everything back and it worked perfect
... Read more
ly!!
Read less
Was this helpful?
Thank you for voting!
my element had went out
3 of 5 people
found this instruction helpful.
-
Sondra from Henderson, TX
- Really Easy
- 15 - 30 mins
-
Socket set
well first i came here thewn i called got my part the next day by the way paying only regular postage. it took me more time to pull the stove out and find the sockets then to actually put the element in.that took a whole 3 minutes. thanks partselect you guys are the best and i will be back.
Was this helpful?
Thank you for voting!
bake element burned out
2 of 2 people
found this instruction helpful.
-
Gary L from DEER PARK, WA
- Very Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Had to move the range out of its little cubby hole in the kitchen so that I could have access to the back of the range. This process probably took the longest. After that it was a piece of cake. Took about 15 minutes to complete the job. So easy, eve a caveman could do it.
Was this helpful?
Thank you for voting!
Bake element broke into pieces
2 of 3 people
found this instruction helpful.
-
Michael from Findlay, OH
- Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
First I removed the screws and popped off the existing element. One of the wires "disappeared" back into the insulation, so I had to remove the back panel of the oven to access that wire and push it back through the opening. Then I attached the new element to the wires and replaced the finishing screws.
Was this helpful?
Thank you for voting!
The broiler had shorted out.
2 of 3 people
found this instruction helpful.
-
Marjorie from Salem, IN
- Really Easy
- 15 - 30 mins
-
Socket set
I had my husband fix it! Very easy for me.
It didn't take him long. The most difficult part was getting to the screws. He had to practically climb into the oven.
The parts were shipped promptly and the whole process was relatively painless!
It didn't take him long. The most difficult part was getting to the screws. He had to practically climb into the oven.
The parts were shipped promptly and the whole process was relatively painless!
Was this helpful?
Thank you for voting!
Broiler element burned out in the oven.
2 of 3 people
found this instruction helpful.
-
Emmett from Buffalo, TX
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
The only hard thing was contorting my old beat up body and joints long enuff to reconnect the 2 wires and oven heat sensor and put in 6 screws with a 1/4" nut driver. I did remover the oven door and that made it much easier for me.
Was this helpful?
Thank you for voting!
The bake element went crazy , caught fire and shot off sparks
2 of 3 people
found this instruction helpful.
-
Mary from Lexington, KY
- Easy
- 15 - 30 mins
-
Nutdriver
We ordered the part, it arrived quickly my husband removed the burnt out element. We took the back off the stove in order to install the new part. It was easier to connect from the back than reach in to the oven. An easy repair and the stove works fine now.
Was this helpful?
Thank you for voting!
Broken Bake Element
2 of 3 people
found this instruction helpful.
-
Ronald from Houston, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
First I turned off breaker, pulled out oven unplugged/or dissconnected electricity to oven, unscrewed broken element in oven, unscrewed back panel of oven to disconnect 2 wires from element, and replaced with new element, then repeated the above in reverse.
Very easy for a typical DYI person.
Very easy for a typical DYI person.
Was this helpful?
Thank you for voting!
Broil (top) element burned out.
2 of 3 people
found this instruction helpful.
-
Dee from McKinney, TX
- Easy
- 15 - 30 mins
-
Nutdriver
Unplugged the power supply. Took off the cover on the back of the unit. Unplugged the wires to the broiler element. Removed the bolts(4) holding the element inside the oven. Removed the temprature sensor from element and took it out. Put it all back the way it came out. Worked great. Took 25 minutes.
Was this helpful?
Thank you for voting!
Broiler element was burned out
2 of 3 people
found this instruction helpful.
-
Charles from Washingtin, DC
- Really Easy
- 15 - 30 mins
-
Socket set
The repair was so simple. First i killed the circuit breaker then removed five screws upluged element from contacts and removed the element plugged new element into the contacts popped the screws back and was done.
Was this helpful?
Thank you for voting!
Old Burner Chrome Ruined
3 of 6 people
found this instruction helpful.
-
RALPH from TROY, NY
- Really Easy
- Less than 15 mins
Replaced
Other Parts Used:
Was this helpful?
Thank you for voting!
baking element went up like a sparkler
2 of 3 people
found this instruction helpful.
-
sherry from washington, ME
- Really Easy
- Less than 15 mins
-
Screw drivers
removed the two screws,then pulled element out and removed the wires,took out element that needed replacing, then connected new element . the repair job took no time at all. i was really impressed with how easy it was.
Was this helpful?
Thank you for voting!
Bake element not working, due to fire during cleaning cycle.
2 of 3 people
found this instruction helpful.
-
BRENDA from DELAWARE, OH
- Really Easy
- Less than 15 mins
-
Socket set
Unplugged Stove. Removed two screws. Unplugged two wires from heating element. Connected the two wires to new heating element. Replaced screws. That's all. 5 minute repair job.....(45 minutes to find right socket haha)
Ordered new heating element on Friday afternoon (3pm) and received part on Saturday at 1:00pm. Impress ... Read more ive! (standard shipping)
Ordered new heating element on Friday afternoon (3pm) and received part on Saturday at 1:00pm. Impress ... Read more ive! (standard shipping)
Read less
Was this helpful?
Thank you for voting!
Cleaned oven with shelves inside...
3 of 6 people
found this instruction helpful.
-
Carol from Roanoke, VA
- Really Easy
- Less than 15 mins
I too made the mistake of cleaning the oven with the shelves in place. It doesn't really harm them...but they turn a tarnished brown color...they look dirty. These replacement shelves were a perfect match. Pricing was reasonable, communication was terrific and shipping was super fast. Happy camper here :-)
Was this helpful?
Thank you for voting!