- Home
- 9119247421
- Instructions
9119247421 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The light inside the oven had burned out
3 of 7 people
found this instruction helpful.
-
Catherine from SEATTLE, WA
- Very Easy
- Less than 15 mins
0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.
No tools needed, the cap is just held in place with pressure from the wire.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.
No tools needed, the cap is just held in place with pressure from the wire.
Read less
Was this helpful?
Thank you for voting!
Old Terminal Block was arcing.
1 person
found this instruction helpful.
-
Robert from HOUSTON, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
Cut Wires to old terminal block and wired in new Terminal Block
Was this helpful?
Thank you for voting!
the drip bowls were worn out
1 person
found this instruction helpful.
-
linda from STANTON, MI
- Very Easy
- Less than 15 mins
simply replaced them.
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip bowl from a big box store was too big even though both say 8”.
1 person
found this instruction helpful.
-
Kathleen from INCLINE VLG, NV
- Very Easy
- Less than 15 mins
Ordered the part and set it in.
Was this helpful?
Thank you for voting!
Hanging broiler
2 of 5 people
found this instruction helpful.
-
Doris from Aberdeen, NJ
- Really Easy
- Less than 15 mins
-
Pliers
Quick and easy, thanks!
Was this helpful?
Thank you for voting!
Change bulb
3 of 8 people
found this instruction helpful.
-
Louis from LEAGUE CITY, TX
- Really Easy
- 30 - 60 mins
-
Nutdriver
Easy
Was this helpful?
Thank you for voting!
Live in an apartment and they had generic drip pans on the stove causing pots to tilt when cooking.
0 of 1 people
found this instruction helpful.
-
Jennifer from Cleveland, OH
- Really Easy
- Less than 15 mins
Replaced drip pans that the apartment Superintendent had in place with the correct drip pans and now cooking is beautiful again! No more uneven cooking on the stove top.
Other Parts Used:
Was this helpful?
Thank you for voting!
Light burnt out.
2 of 8 people
found this instruction helpful.
-
Roscoe G from ROCHESTER, NY
- Very Easy
- Less than 15 mins
Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.
Was this helpful?
Thank you for voting!
Finish coming off of bowls
0 of 2 people
found this instruction helpful.
-
Robert from Ledyard, CT
- Really Easy
- Less than 15 mins
Removed burner from each one. removed drip bowl. Inserted new bowl. Replaced burner. Excellent help from order people so I got the correct bowl was irreplacable.
Other Parts Used:
Was this helpful?
Thank you for voting!
Burners would not lay flat
8 of 36 people
found this instruction helpful.
-
Alfred from Forest, VA
- Really Easy
- Less than 15 mins
Removed the burner elements, removed and disposed of old drip pans, cleaned the area, relaced with new drip pans and replaced the burner elements. Verified all burners were level - good as the day it was new!
Other Parts Used:
Was this helpful?
Thank you for voting!
Drawer guide
-
Lee from Grass Valley, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Used Phillips screw driver, installed guide, applied lubricant.
Was this helpful?
Thank you for voting!
Clips needed to re attach heating element
-
Dennis from Orlando, FL
- Really Easy
- Less than 15 mins
-
Pliers
Pulled out old with pliers. Twisted new clips in per instructions.
Was this helpful?
Thank you for voting!
Finding a drip pan that fit so that pots could sit level.
-
Ann B from Hueytown, AL
- Really Easy
- Less than 15 mins
Ordered the drip pan from ParSelect.com. Unplugged element and took out old pan. Placed new pan in and replaced element. For the first time in many years, the part fit.
Was this helpful?
Thank you for voting!
Right Front [surface burner terminal block kit]
-
Wayne from Montoursville, PA
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
We did the repair by following the inclosed instructions. we are elderly retired average ages 82. This was our first repair and it went very well. We are so pleased to have saved over $80.00 compared with hired labor 3 yre. ago for the same part. Thanks so much for your good service.
Was this helpful?
Thank you for voting!
drawer coming out of the track and falling to the floor.
-
Steven from Waukesha, WI
- Really Easy
- 15 - 30 mins
-
Screw drivers
pulled drawer out and installed drawer guide
Was this helpful?
Thank you for voting!