My Orders
- Home
- 9116048111
- Instructions
9116048111 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Stove igniters not sparking
1 person
found this instruction helpful.
-
rick from NEWNAN, GA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
The spark control module is located in the top section near the clock. Take off the back cover. Use needle nose pliers to disconnect the wires. The modules are marked with letters so connecting the new module is very easy. The range works great. My Kenmore is a 1985 model.
Was this helpful?
Thank you for voting!
Gas electric ignition system stopped working
1 of 2 people
found this instruction helpful.
-
Henry from LAPORTE, PA
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
Replaced old ignition module with new module from parts select.
The most important tip was to label each lead before removing from old ignition module.
The most important tip was to label each lead before removing from old ignition module.
Was this helpful?
Thank you for voting!
Oven would not light
-
frank from steger, IL
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
Unplugged from wall. turned off gas. removed broiler. removed burner assy. removed cover for electicial panel. unplugged igniter from electicial panel. removed screw for igniter from burner& installed new one.
Was this helpful?
Thank you for voting!