91147722200 Kenmore Range - Parts

The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature inside your oven while it is on and send the temperature back up to the electronic control, which adjusts as necessary. If your oven is havi...Read moreng difficulty achieving warmer temperatures and/or keeping warmer temperatures up, you may want to test your temperature sensor. Before you make this repair remember to unplug your range from the power source, and turn off the gas shut off valve.

This screw is sold individually.

This light bulb is used in the interior oven. NOTE: This bulb has looped pins, not the straight pins.

This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain. The grate measures 15-1/2 inches wide by 13 inches deep and the pan is about 17 inches wide by 13 inches deep. No tools are required to replace this item, simp...Read morely pull out the lower drawer of your range, pull down the front of the drawer, slide the pan out and slide the new one into place. This is a genuine part sourced right from the manufacturer.

This halogen lamp bulb is a genuine OEM replacement part for your oven. If the light has burned out in your oven, replace it with this part. This is a 35 watt bulb. Replacing this bulb is fairly easy but will require pulling the oven out from the wall. Make sure to shut off power to the unit before beginning this repair.

This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to connect the different parts of your oven door. This part is an authentic OEM part sourced directly from the manufacturer.

This broil element is a genuine OEM replacement part designed to deliver high, direct heat from the top of the oven cavity for broiling and browning food. It operates at 240 volts and is mounted at the top of the oven interior. This element is engineered to replace units that no longer heat, heat unevenly, or show visible signs of damage ...Read moresuch as burn spots or breaks. It is compatible with a wide range of electric ranges and wall ovens and replaces several previous part numbers. Installation requires disconnecting the appliance from power and wearing protective gloves. Always verify compatibility with your specific model before purchasing.