911474 Kenmore Wall Oven - Parts

This screw is black in color and sold individually.

The wiring of this part may differ from the original and may need to be installed by an appliance repair person.

This light switch is controlled by opening and closing the oven door

*Wiring could be different from original and will possibly need to be installed by an appliance repairperson.

Secure the oven door during high-heat cleaning with a replacement lock motor and switch assembly. The motor moves the latch into the locked or unlocked position. A built-in switch reports the latch position to the oven control so the cleaning cycle can run safely. Replacement may be needed if the door will not lock, remains locked after t...Read morehe oven cools, or the cleaning cycle will not start. Check the latch arm and wiring for damage before service. Do not force the oven door open. Shut off electrical power, allow the oven to cool fully, and wear work gloves during installation.

This gasket seals the oven door.

This part acts like a safety thermostat on the appliance. Once it reaches a certain temperature it will shut off the heat source (element) to make sure the temperature doesn't go any higher.