Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The dryer's lint filter was cracked.
3 of 3 peoplefound this instruction helpful.
David E from SAN ANTONIO, TX
Really Easy
Less than 15 mins
I put the dryer information into my browser and found PartSelect had the exact replacement part I needed. I ordered the part and it came is just a few days. I removed the part from the excellent packaging, removed the cracked lint filter from the dryer, replaced it with the new lint filter and done! Among things I've successfully r
... Read moreepaired, this was the easiest and best job I've ever done. Quick, Easy and painless. Thanks for asking!
Read less
Was this helpful?
Thank you for voting!
The mesh was ripping away from the frame on the dryer filter
3 of 3 peoplefound this instruction helpful.
Carla from CHARLOTTE, NC
Very Easy
Less than 15 mins
Ordered a new one and installed it in a matter of seconds. Not difficult!
Was this helpful?
Thank you for voting!
None
4 of 6 peoplefound this instruction helpful.
Ernest J from Columbia, SC
Very Easy
Less than 15 mins
When manufacturer confirmed the part would fit without an adapter, it was the easiest DIY task ever undertaken.
Was this helpful?
Thank you for voting!
Dryer work but wouldn’t shut off when finished cycle, had to shutoff from breaker
4 of 7 peoplefound this instruction helpful.
joaquin from MIAMI BEACH, FL
Very Easy
Less than 15 mins
Screw drivers
With a thin flat screwdriver I was able to pry out the old door switch, I replaced it with the new door switch, pushed back in dryer and so far is working since I installed a month ago.
Was this helpful?
Thank you for voting!
Not heat
3 of 4 peoplefound this instruction helpful.
Sal from MORENO VALLEY, CA
Really Easy
30 - 60 mins
Screw drivers, Wrench (Adjustable)
Followed the instruction on video.was great after three parts now is OK .we have heat.still cheaper than having it service.
Was this helpful?
Thank you for voting!
HST code given by dryer
3 of 5 peoplefound this instruction helpful.
marty from NEOSHO, MO
Easy
15 - 30 mins
Screw drivers
Called LG on the phone and they gave the button presses for diagnostics, which then gave the HST code, saying the Humidity sensor was bad. The part was described as the Humidity sensor module. Actually it's just the wire leads for the sensor which must be electronic and only accessible by disassembling the dryer. There were descr
... Read moreiptions about cleaning the wires, perhaps because some people use dryer sheets which cause a buildup on the wires and prevent them from doing their job. I use wool balls and have no buildup on my wires and replacing them did not fix the sensor, because the module accessible inside the dryer is not the moisture sensor, but only the wire leads.
Read less
Was this helpful?
Thank you for voting!
I would turn on the dryer it would run for about 10-20 seconds and then shutoff, and could smell something burning
3 of 5 peoplefound this instruction helpful.
Kevin from MASHPEE, MA
Really Easy
15 - 30 mins
Screw drivers, Socket set, Wrench (Adjustable)
There’s all sorts of videos on it I watched. It was actually very simple
Was this helpful?
Thank you for voting!
Thumping noise when on
2 of 2 peoplefound this instruction helpful.
Bob from Holiday, FL
Very Easy
15 - 30 mins
Screw drivers
watched the video on line then did the repair, very easy to replace
Was this helpful?
Thank you for voting!
Igniter burned out
2 of 2 peoplefound this instruction helpful.
EDWARD from KNG OF PRUSSA, PA
A Bit Difficult
1- 2 hours
Nutdriver, Screw drivers, Socket set
Completely had to dismantle the dryer to get to the igniter. The screw holding the igniter is a SOB to get at for extraction, and even worse putting back.,
Was this helpful?
Thank you for voting!
Dryer was making a terrible sound.
2 of 3 peoplefound this instruction helpful.
NANCY from ATASCADERO, CA
Really Easy
30 - 60 mins
An appliance repairman determined the problem which was that it needed new pulleys and thankfully PartSelect carried them. He installed them in an hour and my dryer runs fine now.
Was this helpful?
Thank you for voting!
Cracked lint filter
2 of 3 peoplefound this instruction helpful.
Richard from MADISON, AL
Very Easy
Less than 15 mins
Simple replacement
Was this helpful?
Thank you for voting!
Loud rumbling noise
1 personfound this instruction helpful.
Michael from RIVERSIDE, CA
Easy
30 - 60 mins
Screw drivers, Socket set, Wrench (Adjustable)
Followed video provided on site
Was this helpful?
Thank you for voting!
CHANGED OUT MOTOR
1 personfound this instruction helpful.
Omar from SILVER CITY, NM
Very Easy
30 - 60 mins
Screw drivers, Socket set
FIRST REMOVED THE LID ON TOP OF DRYER.THEN THE CONTROL PANEL AND THE STEAM TRAY. HAVE TO UNCLIP TWO HARNEST CONNECTORS. REMOVED THE FACE PLATE THAT HOLDS THE DRYER WALLS TOGETHER ALSO REMOVE TO SENSOR HARNESS CLIPS. .REMOVED THE BELT FROM MOTOR. TOOK DRUM OUT . UNCLIPPED MOTOR COLLAR SNAP CLIPS DISCONNECT THE MOTOR HARNESS. INSTALL NE MOT
... Read moreOR AND CONNECT HARNESS INSTALL CLIP . REINSTALL DRUM AND PUT BELT ON. CONNECT HANESSES AND INSTALL FACE PLATE. INSTALL CONTROL PANEL AND THE TOP LID.
Read less
Was this helpful?
Thank you for voting!
Had an issue with the dryer not drying the clothes in the allotted time and turning the dryer off. I knew it was still getting heat so I googled the issue with suggestions.
1 personfound this instruction helpful.
Tim from Tavares, FL
Really Easy
30 - 60 mins
Screw drivers
I watched a YouTube video with how to take the dryer apart and remove the sensors. I followed the what the instructions were removing the top of the dryer and then the front panel. Once that was removed it was a matter of removing 7 more screws and the lint collector piece came off. Popped the sensor pieces out. Cleaned the inside of the
... Read moredryer and reinstalled a total of 5 parts and dryer is working fine and the clothes are drying in the allotted time it use to take.
Read less
Was this helpful?
Thank you for voting!
Persistent smell of propane despite multiple duct cleanings.
2 of 4 peoplefound this instruction helpful.
Steve from GOLDFIELD, NV
A Bit Difficult
1- 2 hours
Screw drivers, Socket set
Despite the young age of this dryer, and failure of all the other trials to fix the problem, I figured maybe the igniter is the problem. Ordered one. Followed a U tube video to take the unit apart. Noticed immediately that there was lots of lint pretty much everywhere inside the cabinet. Come to find that the blower and the vent had never
... Read more been connected, with about two inches gap. So, some of the exhaust was going out the vent hose, but lots was not. In fact, lint had coated the propane jet and the air mixer assembly. Replacing the igniter was not particularly difficult, once the dryer was in lots of pieces. I did not test the igniter before replacing it. I did connect the vent outlet to the blower and secured it. End result was a perfectly functioning unit and a happy wife. I don't recall reading about this as a possible cause of propane odor and failure of the unit to heat up.
My Orders
