8LSP Whirlpool Washer - Parts

The leveling leg locking nut is an OEM replacement fastener for use in dryers and washers. It has a head diameter of 3/8 inches and a thread pitch of 16 threads per inch. The nut secures the leveling legs which helps to stabilize and level the appliances when they are placed on uneven surfaces. The nut ensures that the leg is stable and d...Read moreoes not move during operation. Over time, the threads on the nut may become stripped, or the nut can corrode and break rendering it unable to secure the leveling legs. A faulty nut will cause the appliance to shake and vibrate excessively, and potentially damage the floor and its internal components. It is recommended to replace both the leveling leg and nut at the same time. Use a wrench or pliers to loosen and remove the old locking nut from the leveling leg. Thread the new nut on to the leveling leg and ensure that it is tightened securely. Be careful not to overtighten and damage the threads. Gently shake the appliance to ensure that it is stable and level. Each nut is sold individually.

Introducing the Whirlpool Agitator Cam Bearing, a genuine OEM part compatible with specific models from Whirlpool. This essential appliance part is perfect for ensuring a proper and smooth surface for your agitator cam to rotate on. Designed with precision, this bearing may slightly differ in size and shape compared to other parts but pro...Read moremises uncompromised quality and performance. The installation process is straightforward, though we advise you to unplug the washer before starting and to wear work gloves for protection. Trust in Whirlpool's commitment to durability and efficiency with this Agitator Cam Bearing. Please verify your model before order placement for perfect fit.

This is a 2-speed drive motor for your washing machine. The motor rotates the spin basket when the washing machine is in spin or tumbling mode. You will likely need to replace the motor if you are experiencing burning smells or your washer will not start. The tools you will need to make this repair include a number two Phillips screwdriver, a flat-blade screwdriver, and a 5/16 nut driver.

Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.

This screw is sold individually.

This is the bearing for the lid hinge. Sold individually.

This spanner nut, also referred to as a lock nut, is a critical component that secures the inner tub to the drive block in large-capacity washers. Featuring a right-hand thread, it ensures the tub remains firmly in place during wash and spin cycles, preventing excessive noise, shaking, or vibration. A worn or damaged nut can lead to poor ...Read moreperformance and operational issues. Installation requires basic tools and disassembly; always disconnect power and water supply before beginning the repair.

This washer agitator base is a genuine OEM component designed to support the agitator’s movement during the wash cycle. Positioned beneath the auger, it creates the back-and-forth motion that moves clothes through water and detergent, helping to loosen dirt and improve cleaning performance. The base works in coordination with the washer’s...Read more motor to maintain consistent agitation. Common symptoms of a failing agitator base include the agitator not moving, poor cleaning results, excessive vibration, or unusual noises during operation. Replacement is recommended when the part is cracked, worn, or no longer functioning properly.

Sold individually.

Sold individually.

CLIP-TOP&CAB-R PNL

This basket drive assembly is for washers. Basket drive assembly sits on top of the transmission shaft and houses the spin basket brake mechanism. The basket drive spins to rotate the basket during the spin cycle.