EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

8ET17 Whirlpool Refrigerator - Instructions

All Instructions for the 8ET17
91 - 105 of 338

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drain clogging causing water to leak bottom of fridge
2 of 2 people found this instruction helpful.
  • Ted C from DSRT HOT SPGS, CA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
After watching videos how to replace went very easy.removed ice maker cut wires replaced switch put back together now working ok so far.
Was this helpful?
Thank you for voting!
Fridge stopped cooling
3 of 5 people found this instruction helpful.
  • ray from palm bay, FL
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
I replaced the defrost relay folling instructions I read on the internet--and it still didn't work--So I replaced the compressor start relay which was easier than the defrost relay--it worked and the fridg is working good.
Was this helpful?
Thank you for voting!
ordered a new ice maker, new refrigerator did not come with one.
2 of 2 people found this instruction helpful.
  • Scott from ROCHESTER, NY
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench (Adjustable)
I watched the video that was included with my on line order, it was helpful, although different model shown . I would say it was not difficult to install, the enclosed instructions were a bit confusing.
Was this helpful?
Thank you for voting!
Ice buildup in freezer causing leaking water into fridge section
2 of 2 people found this instruction helpful.
  • Diane from Brighton, MI
  • Very Easy
  • 30 - 60 mins
  • Nutdriver, Pliers
In my case the defrost thermostat was not the problem. Not worth going through the hassle of checking the thermostat as I would have had to cut it out and test it in another freezer (while the food that was in the freezer was being stored elsewhere). I just ended up buying it and replacing it. So, like I said the defrost thermostat was NO T the issue. I ended up getting a drain tube heater strap, and have been keeping my eye on the fridge. It hasn't been long enough to say the strap fixed the problem, but all indications are pointing to that being the case.
Was this helpful?
Thank you for voting!
Crisper drawer rail broken at one end
2 of 2 people found this instruction helpful.
  • MARTY from GREAT FALLS, MT
  • Very Easy
  • 30 - 60 mins
The rail just snapped into place with a light pressure. I worried it would require manipulation or heavy pressure and I would break the end while installing it.
Was this helpful?
Thank you for voting!
install ice maker with all parts for refridgerator with no ice cube hardware on it.
2 of 2 people found this instruction helpful.
  • Vincent from THE VILLAGES, FL
  • Really Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
I followed the directions and it worked.
Was this helpful?
Thank you for voting!
Refrigerator coils froze up and 5 weeks later it got stuck in defrost.
2 of 2 people found this instruction helpful.
  • LES from GRAY, TN
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
The parts were reasonably priced, shipped promptly and received in a couple of days. I reviewed a YouTube video before starting that was beneficial. Huge savings over retail repair service. A+ replacement parts house and I would highly recommend.
Was this helpful?
Thank you for voting!
ice maker
2 of 2 people found this instruction helpful.
  • Ann from MC CUNE, KS
  • Really Easy
  • 30 - 60 mins
My husband is an appliance man and he did the work.
Was this helpful?
Thank you for voting!
Refrigeration Door Handle End Cap cracked
3 of 5 people found this instruction helpful.
  • Jon from Brea, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The repair was REALLY SIMPLE. I popped off the cap cover from the existing end cap, insert the door handle to the new end cap, screw on the new end cap with a Phillips screw driver, and then push the old cap cover back on. Took less than 10 minutes, if that.
Was this helpful?
Thank you for voting!
fridge door switch did not work
2 of 2 people found this instruction helpful.
  • stu from richmond, VA
  • Easy
  • Less than 15 mins
  • Socket set
I removed the switch housing (4 screws), replacing the switch in the housing was a snap. It took 5 minutes, cost $8 and light works like new!

Why didn't I order this part and do the repair earlier? Very simple.
Was this helpful?
Thank you for voting!
Faulty light socket
3 of 5 people found this instruction helpful.
  • Larry from HOUSTON, TX
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Followed the video instructions.
Was this helpful?
Thank you for voting!
OLDER Ice Maker on the fritz
6 of 14 people found this instruction helpful.
  • Eric S from Boca Raton, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Wrench set
Grat help on the phone. We saw repair on YouTube. my wife and I worked it together. It was child's play!! It went beautifully. we were able to "chill out" with ice aplenty!!Thanks...eric
Was this helpful?
Thank you for voting!
End cap of fridge door had failed
2 of 2 people found this instruction helpful.
  • Christine from WASHINGTON, DC
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Simple to unscrew and replace parts
Was this helpful?
Thank you for voting!
Light didnt go on
3 of 5 people found this instruction helpful.
  • dorotea from staten island, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The light rocker switch wasnt working. I found the part on the web site. It was so easy. I used a screw driver to pop out the old one and pop the new one in. It took 5 min. Thanks!!!
Was this helpful?
Thank you for voting!
Broken Refrigerator door retainer
2 of 2 people found this instruction helpful.
  • Leroy from IRVINGTON, AL
  • Very Easy
  • Less than 15 mins
This job was extremely easy, snap on.
Was this helpful?
Thank you for voting!
All Instructions for the 8ET17
91 - 105 of 338