88889 Jenn-Air Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
vent fan cloging up
0 of 1 people
found this instruction helpful.
-
JAMES from McALESTER, OK
- Really Easy
- Less than 15 mins
old filter fell into from removing and cleaning,
removed cover pulled out filter ,replaced it with new one.
removed cover pulled out filter ,replaced it with new one.
Was this helpful?
Thank you for voting!
Needed to replace the grease filter!
0 of 2 people
found this instruction helpful.
-
Colette from Annapolis, MD
- Really Easy
- Less than 15 mins
Followed the directions. Piece of cake!!
Was this helpful?
Thank you for voting!
The paint begin popping of my original grill. My son had a friend that said that he could remove the old paint and repaint for me. Unfortunately in the shuffle of a motorcycle performance shop the grill was lost. I have been trying to get help from Jenn-Aire since March and they just kept saying th
0 of 2 people
found this instruction helpful.
-
Norma from Salisbury, NC
- Really Easy
- Less than 15 mins
Very simple for me!!! Open the box, uncover the new grill and lay it in its place.
Thank you so much!
Thank you so much!
Was this helpful?
Thank you for voting!
old yucky filter
0 of 2 people
found this instruction helpful.
-
Diane from Flower Mound, TX
- Really Easy
- Less than 15 mins
Thanks, have been looking for a replacement for this dinosaur filter forever. It is great!
Was this helpful?
Thank you for voting!
rotten filter for down draft vent
0 of 2 people
found this instruction helpful.
-
Craig from Ashburn, GA
- Really Easy
- Less than 15 mins
How I did the repair is no consequence. The service of easily finding the part on your site is GREAT! and the shipping time more than reasonable! Thanks!
Was this helpful?
Thank you for voting!
Numbers on original stove top had become unreadable due to age and needed to be replaced
0 of 2 people
found this instruction helpful.
-
James from Montclair, VA
- Really Easy
- Less than 15 mins
I originally ordered the knobs that appeared to be an exact match for the ones on the stove top (Part # PS1515077). However those knobs are designed to fit on D post stems. I finally ordered PS48861 which are designed to fit double flat post stems which is what I have on my stove top. New parts fit perfectly. Remove old knobs put new ones
... Read more
on. Total repair time less than one minute. Part Select was great about getting the original parts and replacement to me quickly.
Read less
Was this helpful?
Thank you for voting!
The paint had chipped and peeled on the inlet grill
0 of 4 people
found this instruction helpful.
-
Ann from Irvington, NY
- Really Easy
- Less than 15 mins
I lifted off the old grill and replaced them with the new ones. My stove top looks great again. If I could find them, I would like to replace the knobs to turn on the gas!
Was this helpful?
Thank you for voting!
bearing went out in blower motor
-
richard from white castle, LA
- Easy
- 15 - 30 mins
-
Screw drivers, Wrench set
removed old motor from cooktop & motor housing & replaced w/ new motor & parts to install same. parts needed where screws & isolators (3).All went ok
Other Parts Used:
Was this helpful?
Thank you for voting!
Filter was very old and falling apart.
-
June S from San Antonio, TX
- Really Easy
- Less than 15 mins
The grease filter was 20+ yrs old and the mesh was falling of the frame. I was very pleased to find this replacement filter (the first filter I received was damaged....placed a call to PartSelect and have a new one the next day). Can't beat service like that!! Thank you, June Patten
Was this helpful?
Thank you for voting!
grease filter was disintegrated and burner knobs were illegaible
-
Jeanne A from Sonoma, CA
- Really Easy
- Less than 15 mins
Installed the new filter and replaced the knobs in about a minute. Customer service helped me find the right parts for an over-35-year-old unit and the installation of them was elementary and took probably less than a minute. I am in business again, cooking for my family; and my visiting relatives can cook without guessing the temperatu
... Read more
re (previous knobs were illegible. Recommend this site without reservation. (Received the parts in about 2 days!). A real treasure of a save!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Could not read numbers on the knobs
-
Bill from ROCKLEDGE, FL
- Really Easy
- Less than 15 mins
Simply pull off the old ones and replace with the new ones. Problem was finding the correct knobs with the double "s" shaft fitting.The item number indicated by the model number was incorrect. I saw a kit with four knobs on your web site and ordered the kit and not the recommended item. Turned out to be the right move and the knobs fir ju
... Read more
st fine.
Read less
Was this helpful?
Thank you for voting!
Burner Knobs worn and bent
-
Linda from Cadiz, KY
- Really Easy
- Less than 15 mins
Placed new burner knobs onto cooktop. easy
Was this helpful?
Thank you for voting!
The original filter was decomposing each time I washed it
-
Sharon from Kenai, AK
- Really Easy
- Less than 15 mins
I removed the protective grid over the filter and fan, turned the clip that held the filter in place and removed it. I placed the new intact filter for my antiquated Jenn-aire in its place, replaced the protective grid, and am happily continuing to cook on my functional cook top.Thank you.
Was this helpful?
Thank you for voting!
Needed to replace the burner knobs on my stove.
-
Candace from Iowa Falls, IA
- Really Easy
- Less than 15 mins
Great company....Fast delivery.
Was this helpful?
Thank you for voting!
Burner knobs were old and some settings had worn off.
-
Athena from Mill Valley, CA
- Really Easy
- Less than 15 mins
Wrap first three fingers of right around old knob. Pull it off and throw in trash. Take new burner knob and slide it onto the stem. Repeat 3X, that is, once for each remaining burner knob. Time to complete job - 45 seconds. :-D
Was this helpful?
Thank you for voting!