My Orders
867812 Kenmore Air Conditioner - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
It was the heat safety switch in the old drive motor
2 of 3 people
found this instruction helpful.
-
Andrew from HATTIESBURG, MS
- Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
It was fairly easy a few tight spaces to reach in but all in all it was pretty straight forward
Was this helpful?
Thank you for voting!
lid from old basket to be installed on new
1 person
found this instruction helpful.
-
Fred from WOODBURY, NY
- Easy
- 15 - 30 mins
Simply bend the lid so hinges slip out of sockets, and repeat to put the lid in the new basket.
Was this helpful?
Thank you for voting!
Washer Had A Continuous Moan And Vibration
-
Roger from Millis, MA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Wrench set
I disconnected the drive belt from the motor and ran the motor to isolate it from the rest of the mechanisms. This was the noise. I disconnected the water lines and electrical cord,laid the machine front down. I disconnected the motor plug,removed the two bracket to body bolts and lifted the motor out to the bench. I then transferred th
... Read more
e bracket to the new motor and reversed the procedure to install the motor. The most difficult part was raising the machine back up alone,I suggest a helper.
Read less
Was this helpful?
Thank you for voting!