Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
not draining at end of cycle
0 of 1 peoplefound this instruction helpful.
Michael from Chevy Chase, MD
A Bit Difficult
30 - 60 mins
Screw drivers
First I dismantled the impellers that drive the wash and drain water to see if they were damaged or clogged - I knew the drain hose was not clogged. It seems you can' remove the wash impeller without breaking it..... at least I couldn't. Since they were ok [i replaced the wash impeller that I broke], it seemed the only other thing
... Read morecould be the timer switch. I replaced it and all was fine again. It replaces by removing the plastic INSIDE panel of the door and quite easily after that.