My Orders
866-1 Maytag Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
one pole of the socket corroded to nothing
-
martien from williamstown, MA
- Easy
- Less than 15 mins
Starting by me making a substitute prong to keep the stove working while the part this coming by mail. was a piece of cake.
Was this helpful?
Thank you for voting!
old drip bowl was worn out
-
Richard from Germantown, MD
- Really Easy
- Less than 15 mins
new drip bowl fit perfectly and was a snap to install.
Was this helpful?
Thank you for voting!
When The Burner Started To Heat (Front) And Then Put The Rice Bag On The Burner. Then The Plastic Bag Began To Burn And The Bag Of Rice Began To Pour Over The Burner. Someone Tried To Clean Up On The Burner But The Burner With Plastic And Hard To Clean The Plastic Off From The Burner.
-
Robert J from Indianapolis, IN
- Really Easy
- Less than 15 mins
Just pull the old out from the stove and put new one on the stove and then tested the burner that is working fine. Thank you very much for order the part. Have a great day.
Was this helpful?
Thank you for voting!
I needed to replace to two 8* drip bowls on the kitchen range
-
Dallas from Arlington, TX
- Really Easy
- Less than 15 mins
(a) I took out (and threw away) two stained 8* chrome drip bowls on my kitchen range; (b) ti put in two new 8" chrome drip bowls on my kitchen range. I'm pleased that I was equal to the task.
Was this helpful?
Thank you for voting!
Old dirty drip pans
-
gizella from mays landing, NJ
- Really Easy
- Less than 15 mins
Removed heating element, installed new drip pan, replaced heating element. Was amazed at fast delivery - ordered in afternoon, arrived fed ex next morning!
Was this helpful?
Thank you for voting!
Burner no longer connected with electric power source
-
Barbara from Pacific Palisades, CA
- Really Easy
- Less than 15 mins
I had determined that the the burner itself was no longer capable of connecting because when I removed another burner and inserted it, it worked just fine. Also, the defective burner had not worked when inserted into another outlet. I was delighted to be able to purchase a replacement so quickly and easily on my own, without having to cal
... Read more
l a repair person or seek a retail outlet.
Read less
Was this helpful?
Thank you for voting!
Burner failure
-
Robert from Brookfield, CT
- Really Easy
- Less than 15 mins
Removed and replaced burner unit.
Was this helpful?
Thank you for voting!
burner fell apart
-
judy from coarsegold, CA
- Really Easy
- Less than 15 mins
Just plugged it in and away I went.
Was this helpful?
Thank you for voting!
Burner stopped heating up.
-
Robin from Chicago, IL
- Really Easy
- Less than 15 mins
Searched the internet for the replacement part, placed the order and then disconnected the old one and inserted the new burner prongs into the socket. Worked perfectly!!!
Was this helpful?
Thank you for voting!
Dirty drip bowl
-
Paul from Carnegie, PA
- Really Easy
- Less than 15 mins
Remove old drip bowl from the range and put a new one back.
Was this helpful?
Thank you for voting!
replacement of heating element for elec. stove
-
Erica from Ivyland borough, PA
- Really Easy
- Less than 15 mins
plugged it in to the spot where missing element was.
Was this helpful?
Thank you for voting!
The burner stopped heating
-
Geraldine from Falls Village, CT
- Really Easy
- Less than 15 mins
Unplugged the old one and plugged in the new, which you sent promptly. No tools. Easiest fix ever.
Was this helpful?
Thank you for voting!
Burner would not heat
-
Craig from Bangor, PA
- Really Easy
- Less than 15 mins
Took the old burner out and inserted the new one. The burner was received two days after ordering. I was very satisfied with the service.
Was this helpful?
Thank you for voting!
needed a new drip bowl and couldn't find ons that fit exactly but you had it
-
Elsie from Garner, NC
- Really Easy
- Less than 15 mins
I removed the old one and put in the new one. Works great!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
Burner receptacle had malfunctioned and been removed
-
Kerry from Silverado, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
10 Minutes for a stove my landlord thought was not fixable (repairman had already cut the wires to the element and capped them)! The delivery person handed me the package, I got out the single tool needed, installed the part, put away the tool, cleaned my hands, and put a pot of water on the stove to boil for pasta. 10 minutes!
Was this helpful?
Thank you for voting!